Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2018-05-22-8
Project Information
Project Identifiers | Project ID: 212997 DEA: 023H2104 EFIS: 0217000070 |
---|---|
DIST-CO-RTE-PM | 02-PLU-70,89-53.5/58.4,21.0/29.9 |
Award Date | 03/02/2018 |
Closeout Date | 01/09/2019 |
Work Description | AC OVERLAY, REPLACE AC SURFACE, GUARDRAIL, SHOULDER BACKING |
Location Description | PLUMAS COUNTY ON ROUTE 70 FROM GREENHORN RANCH ROAD TO 0.2 MILE EAST OF SLOAT ROAD AND ON ROUTE 89 FROM 0.3 MILE SOUTH OF ALTA CAMP ROAD TO CANYON DAM PICNIC AREA |
QA Service Level | 1 (Verified on 02/02/2018) |
Sample Information
Sample Taken Date | 05/22/2018 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/23/2018 |
Sample type | Verification | A brief description of the sample | JMF 3/4 Virgin Agg 4 bins |
The quantity of what the sample constitutes | 6 Bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Lynn | Last name of sampler or witnessed by | Hunnicut |
Title of sampler | Field Technician | Telephone number of sampler | Unknown |
Laboratory sample identification | D77417 | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Granite Nevada | Transportation Laboratory (TL) Number | T101 C894813 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | T101 C894813 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | unknown |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | JMF Virgin agggregate 4 bins | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | At the plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Not set |
Sublot number | Not set | Aggregate Mix Number | Not set |
HMA Pay | No |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2018-05-22-8-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/25/2018 | Terry McCormick | No | JMF, virgin aggregate Bin A, | Info | |
2018-05-22-8-2 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/25/2018 | Terry McCormick | No | JMF, Virgin Aggregate Bin B. | Info | |
2018-05-22-8-3 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/25/2018 | Terry McCormick | No | JMF, Virgin Aggregate Bin C. | Info | |
2018-05-22-8-4 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 05/25/2018 | Terry McCormick | No | JMF, Virgin aggregate Bin C. | Info | |
2018-05-22-8-5 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/15/2018 | Terry McCormick | No | JMF 6 Bins, 1 inch virgin aggregate Bin A | Info | |
2018-05-22-8-6 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/15/2018 | Terry McCormick | No | JMF 6 Bins, 3/4 virgin aggregate Bin B | Info | |
2018-05-22-8-7 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/15/2018 | Terry McCormick | No | JMF 6 Bins, 1/2 virgin aggregate Bin C | Info | |
2018-05-22-8-8 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/15/2018 | Terry McCormick | No | JMF 6 Bins, 3/8 inch virgin aggregate Bin D | Info | |
2018-05-22-8-9 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/15/2018 | Terry McCormick | No | JMF 6 Bins, Virgin Rock virgin aggregate Bin E | Info | |
2018-05-22-8-10 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/15/2018 | Terry McCormick | No | JMF 6 Bins, Virgin con sand, virgin aggregate Bin G | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2018-05-22-8-1 AASHTO T27-14
DIME Test ID: 2018-05-22-8-2 AASHTO T27-14
DIME Test ID: 2018-05-22-8-3 AASHTO T27-14
DIME Test ID: 2018-05-22-8-4 AASHTO T27-14
DIME Test ID: 2018-05-22-8-5 AASHTO T27-14
DIME Test ID: 2018-05-22-8-6 AASHTO T27-14
DIME Test ID: 2018-05-22-8-7 AASHTO T27-14
DIME Test ID: 2018-05-22-8-8 AASHTO T27-14
DIME Test ID: 2018-05-22-8-9 AASHTO T27-14
DIME Test ID: 2018-05-22-8-10 AASHTO T27-14
DIME Test ID: 2018-05-22-8-11 AASHTO T85-13
DIME Test ID: 2018-05-22-8-12 CTM 204-June 2010
DIME Test ID: 2018-05-22-8-14 AASHTO T96-02r10
DIME Test ID: 2018-05-22-8-15 AASHTO T210-15
DIME Test ID: 2018-05-22-8-16 AASHTO T176-08
DIME Test ID: 2018-05-22-8-17 AASHTO T335-09r13
DIME Test ID: 2018-05-22-8-18 AASHTO T84-14
DIME Test ID: 2018-05-22-8-19 ASTM D4791-10