Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2018-05-15-22
Project Information
Project Identifiers | Project ID: 212845 DEA: 023H1304 |
---|---|
DIST-CO-RTE-PM | 02-LAS-395-47.0/56.5 |
Award Date | 12/22/2017 |
Closeout Date | 01/09/2019 |
Work Description | AC OVERLAY, REPLACE AC SURFACE, RUMBLE STRIP, GUARDRAIL |
Location Description | LASSEN COUNTY AT AND NEAR JANESVILLE FROM 1.9 MILES SOUTH OF LAKECREST DRIVE TO 0.2 MILE NORTH OF SUNNYSIDE ROAD |
QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
Sample Taken Date | 05/15/2018 | Sample Unique Key | 22 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/16/2018 |
Sample type | Verification | A brief description of the sample | JMF 4 bins Virgin Aggregate |
The quantity of what the sample constitutes | JMF 11 bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Jeff | Last name of sampler or witnessed by | Lehti |
Title of sampler | TECH | Telephone number of sampler | Unknown |
Laboratory sample identification | D77395 | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Ward Lake Hat Crk Construction | Transportation Laboratory (TL) Number | T101 C894810 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | T101 C894810 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | unknown |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Virgin aggregate 4 bins | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | At the plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Not set |
Sublot number | Not set | Aggregate Mix Number | Not set |
HMA Pay | No |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2018-05-15-22-11 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/08/2018 | Terry McCormick | No | JMF, Virgin aggregate quality tests | Info | |
2018-05-15-22-12 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 06/07/2018 | Terry McCormick | No | JMF, Virgin aggregate quality tests | Info |
Go to page:
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2018-05-15-22-1 AASHTO T27-14
DIME Test ID: 2018-05-15-22-2 AASHTO T27-14
DIME Test ID: 2018-05-15-22-3 AASHTO T27-14
DIME Test ID: 2018-05-15-22-4 AASHTO T27-14
DIME Test ID: 2018-05-15-22-5 AASHTO T84-14
DIME Test ID: 2018-05-15-22-6 AASHTO T304-11
DIME Test ID: 2018-05-15-22-7 AASHTO T210-15
DIME Test ID: 2018-05-15-22-8 AASHTO T85-13
DIME Test ID: 2018-05-15-22-9 AASHTO T96-02r10
DIME Test ID: 2018-05-15-22-10 AASHTO T176-08
DIME Test ID: 2018-05-15-22-11 AASHTO T335-09r13
DIME Test ID: 2018-05-15-22-12 ASTM D4791-10