Owner Lab
- CT QASI - Bay Area Field Laboratory
DIME Sample ID 2018-05-24-1
Sample is locked from editing. info
Project Information
| Project Identifiers |
DEA: No Project |
|---|
| DIST-CO-RTE-PM | --- |
|---|
| Award Date | Not set |
|---|
| Closeout Date | Not set |
|---|
| Work Description | Special project identifier for material not associated with a project |
|---|
| Location Description | Not set |
|---|
| QA Service Level | NOT VERIFIED |
|---|
Sample Information
| Sample Taken Date | 05/24/2018 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/25/2018 |
|---|
| Sample type | Verification |
A brief description of the sample | 3/4 A449 HDG all thread rod |
|---|
| The quantity of what the sample constitutes | 3 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | David |
Last name of sampler or witnessed by | Flygare |
|---|
| Title of sampler | CA METS QA Inspector |
Telephone number of sampler | 801-669-2984 |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | Unknown |
Transportation Laboratory (TL) Number | Unknown |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B76-105-18 |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | none |
|---|
| Heat Number(s) | 494620 |
Nut Mfg. Lot Number(s) | n/a |
|---|
| Washer Mfg. Lot Number(s) | n/a |
Bolt Specification | A449 |
|---|
| Bolt Length(s) | 1'-8" |
Nut Specification | n/a |
|---|
| Washer Specification | n/a |
Finish | HDG |
|---|
| Diameter/Size | 3/4" x 1'-8" |
Bolt Mfg. Lot Number | Rockford C3667 |
|---|
| Rocap Test Requirement(s) | none |
Lubricant Requirements(s) | none |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2018-05-24-1-1 | ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws) | Brian | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/30/2018 | Brian | Yes | 06/06/2018 | A449 Threaded Rod |
|
| 2018-05-24-1-2 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/30/2018 | Brian Ewing | Yes | 06/06/2018 | |
|
| 2018-05-24-1-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/30/2018 | Brian Ewing | Yes | 06/06/2018 | |
|
| 2018-05-24-1-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/30/2018 | Brian Ewing | Yes | 06/06/2018 | |
|
| 2018-05-24-1-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/30/2018 | Brian Ewing | Yes | 06/06/2018 | |
|
| 2018-05-24-1-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/30/2018 | Brian Ewing | Yes | 06/06/2018 | |
|
| 2018-05-24-1-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Brian Ewing | CT HQ - Sacramento Structural Materials Testing Laboratory | 05/30/2018 | Brian Ewing | Yes | 06/06/2018 | |
|
45072450734507445075450764507745078
