Sample Record
Owner Lab
- CT HQ - QASI Bay Area Field Office
DIME Sample ID 2018-02-01-2
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 212573 DEA: 010B5504 EFIS: 0112000137 |
---|---|
DIST-CO-RTE-PM | 01-MEN-162-16.2 |
Award Date | 09/28/2017 |
Closeout Date | 10/05/2020 |
Work Description | RECONSTRUCT ROADWAY, CONSTRUCT SOLDIER PILE AND TIEBACK WALL |
Location Description | MENDOCINO COUNTY ON ROUTE 162 1 MILE EAST OF MIDDLE FORK EEL RIVER BRIDGE |
QA Service Level | 1 (Verified on 10/03/2017) |
Sample Information
Sample Taken Date | 02/01/2018 | Sample Unique Key | 2 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/01/2018 |
Sample type | Verification | A brief description of the sample | A325 Bolts |
The quantity of what the sample constitutes | 9 and 12 | From where was the sample collected | Fabricator |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Flygare |
Title of sampler | CA METS QA Inspector | Telephone number of sampler | 801-669-2984 |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | UIS | Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | B76-021-18 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | none |
---|---|---|---|
Heat Number(s) | 10288950, 10465470 | Nut Mfg. Lot Number(s) | n/a |
Washer Mfg. Lot Number(s) | n/a | Bolt Specification | A325 HDG |
Bolt Length(s) | 1 1/2" and 2' | Nut Specification | n/a |
Washer Specification | n/a | Finish | HDG |
Diameter/Size | 1/2" x 1 1/2", 5/8" x 2" | Bolt Mfg. Lot Number | BG0058, BG0805 |
Rocap Test Requirement(s) | none | Lubricant Requirements(s) | none |
Submitted Tests
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2018-02-01-2-1 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-01-2-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-01-2-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-01-2-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-01-2-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-01-2-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-01-2-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-01-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-02-01-2-9 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-01-2-10 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-01-2-11 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-01-2-12 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-01-2-13 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-01-2-14 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-01-2-15 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-01-2-16 ASTM B499-14 (Verified)
DIME Test ID: 2018-02-01-2-17 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-01-2-18 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-01-2-19 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-01-2-20 ASTM E18-15 (Verified)
DIME Test ID: 2018-02-01-2-21 ASTM E18-15 (Verified)