DIME - Sample Record for DIME Sample ID 2018-01-29-2

DIME » All Projects » Project - DEA: 06471504 » Sample 2018-01-29-2 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2018-01-29-2

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 209146 DEA: 06471504 EFIS: 0600000464 COOP: 061549
DIST-CO-RTE-PM	06-TUL-99-39.6/41.3
Award Date	02/24/2017
Closeout Date	03/03/2020
Work Description	RECONSTRUCT INTERCHANGE WITH NEW PUMPING PLANT.
Location Description	TULARE COUNTY AT GOSHEN FROM 0.9 MILE NORTH OF ROUTE 99/198 WEST SEPARATION TO 0.2 MILE NORTH OF NORTH GOSHEN OVERHEAD
QA Service Level	1 (Verified on 10/08/2013)

Sample Information

Sample Taken Date	01/29/2018	Sample Unique Key	2
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	01/31/2018
Sample type	Quality Assurance	A brief description of the sample	A325 HDG Rocap Assembiy
The quantity of what the sample constitutes	388	From where was the sample collected	Fabricator
First name of sampler or witnessed by	Edward	Last name of sampler or witnessed by	Leach
Title of sampler	QA	Telephone number of sampler	916-243-5195
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	CK Johnson Industries	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	S38-019-18	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	75C275BA30G 75C325BA30G 100C375BA30G
Heat Number(s)	DL17103753, DL17103750, DL17101702	Nut Mfg. Lot Number(s)	DL17105148, DL17105148, DL17103954
Washer Mfg. Lot Number(s)	D4421, D4421, 174328	Bolt Specification	A325
Bolt Length(s)	2-3/4, 3-1/4, 3-3/4	Nut Specification	A563
Washer Specification	F436	Finish	HDG
Diameter/Size	3/4 1''	Bolt Mfg. Lot Number	397031A, 397036A, 397956A
Rocap Test Requirement(s)	Yes	Lubricant Requirements(s)	Yes

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2018-01-29-2-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred	Yes	02/13/2018	A325
2018-01-29-2-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred	Yes	02/13/2018	A325
2018-01-29-2-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred	Yes	02/13/2018	A325
2018-01-29-2-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred	Yes	02/13/2018	A325
2018-01-29-2-5	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred	Yes	02/13/2018	Nut Proof Load
2018-01-29-2-6	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred	Yes	02/13/2018	Nut Proof Load
2018-01-29-2-7	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred	Yes	02/13/2018	Nut Proof
2018-01-29-2-8	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred Saylor	Yes	02/13/2018
2018-01-29-2-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred Saylor	Yes	02/13/2018
2018-01-29-2-10	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	02/02/2018	Fred Saylor	Yes	02/13/2018

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-01-29-2-1 ASTM F606-14a (Verified)
DIME Test ID: 2018-01-29-2-2 ASTM F606-14a (Verified)
DIME Test ID: 2018-01-29-2-3 ASTM F606-14a (Verified)
DIME Test ID: 2018-01-29-2-4 ASTM F606-14a (Verified)
DIME Test ID: 2018-01-29-2-5 ASTM F606-14a (Verified)
DIME Test ID: 2018-01-29-2-6 ASTM F606-14a (Verified)
DIME Test ID: 2018-01-29-2-7 ASTM F606-14a (Verified)
DIME Test ID: 2018-01-29-2-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-21 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-22 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-23 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-24 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-25 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-26 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-27 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-28 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-29 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-30 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-31 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-32 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-33 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-34 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-01-29-2-35 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-36 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-37 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-38 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-39 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-40 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-41 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-42 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-43 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-44 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-45 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-46 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-47 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-48 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-49 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-50 ASTM B499-14 (Verified)
DIME Test ID: 2018-01-29-2-51 ASTM E18-15 (Verified)
DIME Test ID: 2018-01-29-2-52 ASTM E18-15 (Verified)
DIME Test ID: 2018-01-29-2-53 ASTM E18-15 (Verified)
DIME Test ID: 2018-01-29-2-54 ASTM E18-15 (Verified)
DIME Test ID: 2018-01-29-2-55 ASTM E18-15 (Verified)