Owner Lab
- CT QASI - Los Angeles Field Laboratory
DIME Sample ID 2017-12-14-13
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 211796
DEA: 073X8704
EFIS: 0713000241 |
|---|
| DIST-CO-RTE-PM | 07-LA-105,405-R2.5,20.5/R21.1 |
|---|
| Award Date | 12/29/2016 |
|---|
| Closeout Date | 04/08/2020 |
|---|
| Work Description | SLOPE RECONSTRUCTION AND PAVEMENT REPAIR |
|---|
| Location Description | LOS ANGELES COUNTY IN AND NEAR HAWTHORNE FROM EL SEGUNDO BOULEVARD UNDERCROSSING TO ROUTE 105/405 SEPARATION |
|---|
| QA Service Level | 1 (Verified on 03/14/2017) |
|---|
Sample Information
| Sample Taken Date | 12/14/2017 |
Sample Unique Key | 13 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 12/21/2017 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | F1554 Grade 55 HDG Anchor Rods |
|---|
| The quantity of what the sample constitutes | 67 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Joe |
Last name of sampler or witnessed by | Lanz |
|---|
| Title of sampler | QA |
Telephone number of sampler | 707 208-5241 |
|---|
| Laboratory sample identification | |
Linked DIME Sample ID | |
|---|
| The fabricator/manufacturer/facility name | Structural and Steel Products |
Transportation Laboratory (TL) Number | |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | L106-024-17 |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | NA |
|---|
| Heat Number(s) | Bolt 58031133
HDG NUT A164716
Plain NUT 3068895
Washer 265467 |
Nut Mfg. Lot Number(s) | AmeriBolt, HDG W3017
Plain W3538 |
|---|
| Washer Mfg. Lot Number(s) | Wrought Washer, 299014 |
Bolt Specification | F1554-GR 55 |
|---|
| Bolt Length(s) | 60" |
Nut Specification | A563 DH |
|---|
| Washer Specification | F436 |
Finish | HDG one end |
|---|
| Diameter/Size | 2-1/2" |
Bolt Mfg. Lot Number | GERDAU, NA |
|---|
| Rocap Test Requirement(s) | NA |
Lubricant Requirements(s) | WAX on Galvanized |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2017-12-14-13-1 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Fred | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred | Yes | 01/11/2018 | |
|
| 2017-12-14-13-2 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Fred | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred | Yes | 01/11/2018 | |
|
| 2017-12-14-13-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred Saylor | Yes | 01/11/2018 | |
|
| 2017-12-14-13-4 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred Saylor | Yes | 01/11/2018 | |
|
| 2017-12-14-13-5 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred Saylor | Yes | 01/11/2018 | |
|
| 2017-12-14-13-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred Saylor | Yes | 01/11/2018 | |
|
| 2017-12-14-13-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred Saylor | Yes | 01/11/2018 | |
|
| 2017-12-14-13-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred Saylor | Yes | 01/11/2018 | |
|
| 2017-12-14-13-9 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred Saylor | Yes | 01/11/2018 | |
|
| 2017-12-14-13-10 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 01/04/2018 | Fred Saylor | Yes | 01/11/2018 | |
|
39424394253942739428394293943039431394323943339434
