Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-12-14-7

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 209146
DEA: 06471504
EFIS: 0600000464
COOP: 061549
DIST-CO-RTE-PM06-TUL-99-39.6/41.3
Award Date02/24/2017
Closeout Date03/03/2020
Work DescriptionRECONSTRUCT INTERCHANGE WITH NEW PUMPING PLANT.
Location DescriptionTULARE COUNTY AT GOSHEN FROM 0.9 MILE NORTH OF ROUTE 99/198 WEST SEPARATION TO 0.2 MILE NORTH OF NORTH GOSHEN OVERHEAD
QA Service Level1 (Verified on 10/08/2013)

Sample Information

Sample Taken Date12/14/2017 Sample Unique Key7
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/20/2017
Sample typeQuality Assurance A brief description of the sampleF1554 Grade 55 HDG Anchor Rods
The quantity of what the sample constitutes67 From where was the sample collectedFabricator
First name of sampler or witnessed byJoe Last name of sampler or witnessed byLanz
Title of samplerQA Telephone number of sampler707 208-5241
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameStructural and Steel Products Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormL106-022-17 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)NA
Heat Number(s)Bolt 58031133 02, HDG Nut A164716, Plain NUT 3068895, Washer 265467 Nut Mfg. Lot Number(s)AmeriBolt, HDG W3017 AmeriBolt, Plain W3538
Washer Mfg. Lot Number(s)Wrought Washer, 299014 Bolt SpecificationF1554-Gr55
Bolt Length(s)60" Nut SpecificationA563-GR DH HDG A563-GR DH Plain
Washer SpecificationF436 FinishHDG one end
Diameter/Size2-1/2" x 60" Bolt Mfg. Lot NumberGERDAU
Rocap Test Requirement(s)NA Lubricant Requirements(s)WAX on Galvanized

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-12-14-7-11ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-12ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-13ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-14ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-15ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-16ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-17ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-18ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-19ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018
2017-12-14-7-20ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory01/04/2018Fred Saylor
Yes
01/12/2018

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-12-14-7-1 ASTM A370-15 (Verified)
DIME Test ID: 2017-12-14-7-2 ASTM A370-15 (Verified)
DIME Test ID: 2017-12-14-7-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-7-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-7-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-7-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-7-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-7-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-7-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-12-14-7-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-12-14-7-19 ASTM E18-15 (Verified)
DIME Test ID: 2017-12-14-7-20 ASTM E18-15 (Verified)
DIME Test ID: 2017-12-14-7-21 ASTM E18-15 (Verified)
DIME Test ID: 2017-12-14-7-22 ASTM E18-15 (Verified)
DIME Test ID: 2017-12-14-7-23 ASTM E18-15 (Verified)
DIME Test ID: 2017-12-14-7-24 ASTM E18-15 (Verified)