Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-10-25-1

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211513
DEA: 120M4904
EFIS: 1212000090
DIST-CO-RTE-PM12-ORA-5-1.2/2.2
Award Date09/20/2016
Closeout Date01/09/2020
Work DescriptionWIDEN FWY AND BRIDGE AND CONSTRUCT RW, SOUND WALL, AND CONC BARRIERS.
Location DescriptionORANGE COUNTY IN SAN CLEMENTE FROM 0.1 MILE NORTH OF AVENIDA MENDOCINO OVERCROSSING TO 0.2 MILE SOUTH OF AVENIDA PRESIDIO UNDERCROSSING
QA Service Level1 (Verified on 11/03/2016)

Sample Information

Sample Taken Date10/25/2017 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/27/2017
Sample typeQuality Assurance A brief description of the sampleASTM A307 Tie Rods
The quantity of what the sample constitutes3 From where was the sample collectedSource
First name of sampler or witnessed byTory Last name of sampler or witnessed byMcLaurin
Title of samplerQA Inspector Telephone number of sampler661-618-5971
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameUlmer Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormL67-223-17 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)N/A
Heat Number(s)304615, DL17100200 Nut Mfg. Lot Number(s)390081A
Washer Mfg. Lot Number(s)N/A Bolt SpecificationASTM A307 Gr. 1045
Bolt Length(s)33" Nut SpecificationASTM A563 Gr. DH
Washer SpecificationASTM F436 FinishHDG
Diameter/Size3/4 Dia Bolt Mfg. Lot NumberCascade Steel
Rocap Test Requirement(s) Lubricant Requirements(s)

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-10-25-1-1ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)FredCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred
Yes
11/07/2017A307 A Rod & Nut
2017-10-25-1-2ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)FredCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred
Yes
11/07/2017A307 A Rod & Nut
2017-10-25-1-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred Saylor
Yes
11/07/2017
2017-10-25-1-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred Saylor
Yes
11/07/2017
2017-10-25-1-8ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred Saylor
Yes
11/07/2017
2017-10-25-1-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred Saylor
Yes
11/07/2017
2017-10-25-1-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred Saylor
Yes
11/07/2017
2017-10-25-1-11ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred Saylor
Yes
11/07/2017
2017-10-25-1-12ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred Saylor
Yes
11/07/2017
2017-10-25-1-13ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred SaylorCT HQ - Sacramento Structural Materials Testing Laboratory10/30/2017Fred Saylor
Yes
11/07/2017

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-10-25-1-1 ASTM F606-14 (Verified)
DIME Test ID: 2017-10-25-1-2 ASTM F606-14 (Verified)
DIME Test ID: 2017-10-25-1-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-25-1-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-25-1-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-25-1-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-25-1-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-25-1-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-25-1-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-25-1-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-10-25-1-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-25-1-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-25-1-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-25-1-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-25-1-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-25-1-19 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-25-1-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-10-25-1-21 ASTM B499-14 (Verified)