Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2017-10-16-1
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 209146 DEA: 06471504 EFIS: 0600000464 COOP: 061549 |
DIST-CO-RTE-PM | 06-TUL-99-39.6/41.3 |
Award Date | 02/24/2017 |
Closeout Date | 03/03/2020 |
Work Description | RECONSTRUCT INTERCHANGE WITH NEW PUMPING PLANT. |
Location Description | TULARE COUNTY AT GOSHEN FROM 0.9 MILE NORTH OF ROUTE 99/198 WEST SEPARATION TO 0.2 MILE NORTH OF NORTH GOSHEN OVERHEAD |
QA Service Level | 1 (Verified on 10/08/2013) |
Sample Information
Sample Taken Date | 10/16/2017 |
Sample Unique Key | 1 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 10/23/2017 |
Sample type | Quality Assurance |
A brief description of the sample | 1 X 12 Anchor Rod |
The quantity of what the sample constitutes | 3 |
From where was the sample collected | Fabricator |
First name of sampler or witnessed by | Ryan |
Last name of sampler or witnessed by | Cummings |
Title of sampler | QA Inspector |
Telephone number of sampler | 916-718-7759 |
Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | CK Johnson Industries |
Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | S-29-228-17 |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | |
Nut Mfg. Lot Number(s) | 26307 |
Washer Mfg. Lot Number(s) | 0517-523 |
Bolt Specification | F1554 Gr. 150 |
Bolt Length(s) | 12 |
Nut Specification | A563 DH |
Washer Specification | F436 |
Finish | HDG |
Diameter/Size | 1 |
Bolt Mfg. Lot Number | 75065295 |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2017-10-16-1-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | Fred | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred | Yes | 11/02/2017 | Nut Proof | |
2017-10-16-1-2 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Fred | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred | Yes | 11/02/2017 | | |
2017-10-16-1-3 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Fred | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred | Yes | 11/02/2017 | | |
2017-10-16-1-8 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred Saylor | Yes | 11/02/2017 | | |
2017-10-16-1-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred Saylor | Yes | 11/02/2017 | | |
2017-10-16-1-10 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred Saylor | Yes | 11/02/2017 | | |
2017-10-16-1-11 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred Saylor | Yes | 11/02/2017 | | |
2017-10-16-1-12 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred Saylor | Yes | 11/02/2017 | | |
2017-10-16-1-13 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred Saylor | Yes | 11/02/2017 | | |
2017-10-16-1-14 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Fred Saylor | CT HQ - Sacramento Structural Materials Testing Laboratory | 10/25/2017 | Fred Saylor | Yes | 11/02/2017 | | |
35127351313513535138351393514035141351423514335144