DIME - Sample Record for DIME Sample ID 2017-09-19-14

DIME » All Projects » Project - DEA: 073X8704 » Sample 2017-09-19-14 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-09-19-14

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 211796 DEA: 073X8704 EFIS: 0713000241
DIST-CO-RTE-PM	07-LA-105,405-R2.5,20.5/R21.1
Award Date	12/29/2016
Closeout Date	04/08/2020
Work Description	SLOPE RECONSTRUCTION AND PAVEMENT REPAIR
Location Description	LOS ANGELES COUNTY IN AND NEAR HAWTHORNE FROM EL SEGUNDO BOULEVARD UNDERCROSSING TO ROUTE 105/405 SEPARATION
QA Service Level	1 (Verified on 03/14/2017)

Sample Information

Sample Taken Date	09/19/2017	Sample Unique Key	14
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/25/2017
Sample type	Quality Assurance	A brief description of the sample	F1554 Anchor Rods Nut Washers
The quantity of what the sample constitutes	2	From where was the sample collected	Job Site
First name of sampler or witnessed by	Prakash	Last name of sampler or witnessed by	Patel
Title of sampler	Unknown	Telephone number of sampler	Unknown
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Nucor, Dyson, Wrought	Transportation Laboratory (TL) Number	NA
Inspector Lot Number from the Transportation Laboratory (TL) Form	L1105117	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)		Nut Mfg. Lot Number(s)
Washer Mfg. Lot Number(s)	297021 302919	Bolt Specification	F1554
Bolt Length(s)	60 50	Nut Specification	A194 / DH
Washer Specification	F436	Finish	A153 / F2329 / Plain
Diameter/Size	2.5" / 2"	Bolt Mfg. Lot Number	3071629 58030825
Rocap Test Requirement(s)		Lubricant Requirements(s)
Washer Inner Diameter(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Privacy Level
2017-09-19-14-1	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017	09/28/2017	Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-2	ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017	09/28/2017	Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-7	ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017		Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-8	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017		Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-9	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017		Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-10	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017		Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-11	ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017		Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-12	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017		Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-13	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017		Yes	10/09/2017	Public - Test Data Visible
2017-09-19-14-14	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	09/28/2017		Yes	10/09/2017	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-09-19-14-1 ASTM A370-15 (Verified)
DIME Test ID: 2017-09-19-14-2 ASTM A370-15 (Verified)
DIME Test ID: 2017-09-19-14-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-14-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-14-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-14-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-14-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-14-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-14-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-14-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-09-19-14-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-14-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-14-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-14-18 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-19-14-19 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-19-14-20 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-19-14-21 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-19-14-22 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-14-23 ASTM B499-14 (Verified)
DIME Test ID: 2017-09-19-14-24 ASTM E18-15 (Verified)
DIME Test ID: 2017-09-19-14-25 ASTM E18-15 (Verified)