DIME - Sample Record for DIME Sample ID 2017-07-14-3

DIME » All Projects » Project - DEA: SMTL-STOCK » Sample 2017-07-14-3 » Sample Details

Sample Record

Owner Labs

CT HQ - QASI Bay Area Field Office
CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2017-07-14-3

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK
DIST-CO-RTE-PM	59---
Award Date	Not set
Closeout Date	Not set
Work Description	Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description	Not set
QA Service Level	NOT VERIFIED

Sample Information

Sample Taken Date	07/14/2017	Sample Unique Key	3
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/14/2017
Sample type	Verification	A brief description of the sample	7/8 x 18 A449 HDG w/nut and washer
The quantity of what the sample constitutes	5 ea	From where was the sample collected	Fabricator
First name of sampler or witnessed by	David	Last name of sampler or witnessed by	Flygare
Title of sampler	CA METS QA Inspector	Telephone number of sampler	801-669-2984
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	UIS	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	B76-094-17	Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	none
Heat Number(s)	bolt 62141302, washer 41542750, nut 10392030	Nut Mfg. Lot Number(s)	16-40-004
Washer Mfg. Lot Number(s)	D2181	Bolt Specification	A449
Bolt Length(s)	18	Nut Specification	A563-DH
Washer Specification	F436	Finish	HDG
Diameter/Size	7/8" x 18"	Bolt Mfg. Lot Number	29097
Rocap Test Requirement(s)	none	Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2017-07-14-3-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred	Yes	07/31/2017	Nut Proof Load
2017-07-14-3-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred	Yes	07/31/2017	Nut Proof Load
2017-07-14-3-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred	Yes	07/31/2017	Nut Proof Load
2017-07-14-3-4	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred	Yes	07/31/2017	Head Broke off
2017-07-14-3-5	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Fred, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred	Yes	07/31/2017	Head Broke off
2017-07-14-3-10	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred Saylor	Yes	07/31/2017
2017-07-14-3-11	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred Saylor	Yes	07/31/2017
2017-07-14-3-12	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred Saylor	Yes	07/31/2017
2017-07-14-3-13	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred Saylor	Yes	07/31/2017
2017-07-14-3-14	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory	07/20/2017	Fred Saylor	Yes	07/31/2017

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2017-07-14-3-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-07-14-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2017-07-14-3-3 ASTM F606-14a (Verified)
DIME Test ID: 2017-07-14-3-4 ASTM F606-14 (Verified)
DIME Test ID: 2017-07-14-3-5 ASTM F606-14 (Verified)
DIME Test ID: 2017-07-14-3-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-14-3-20 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-21 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-22 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-23 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-24 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-25 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-26 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-27 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-28 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-29 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-30 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-31 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-32 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-33 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-34 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-14-3-35 ASTM E18-15 (Verified)
DIME Test ID: 2017-07-14-3-36 ASTM E18-15 (Verified)
DIME Test ID: 2017-07-14-3-37 ASTM E18-15 (Verified)
DIME Test ID: 2017-07-14-3-38 ASTM E18-15 (Verified)