Sample Record

Owner Lab

  • CT HQ - QASI Bay Area Field Laboratory

DIME Sample ID 2017-07-06-7

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211800
DEA: 09356104
EFIS: 0912000044
DIST-CO-RTE-PM09-MNO-395-34.1
Award Date01/31/2017
Closeout Date11/12/2019
Work DescriptionCONSTRUCT MAINTENANCE EQUIPMENT STORAGE BUILDING AND SITE WORK.
Location DescriptionBUILDING CONSTRUCTION ADJACENT TO STATE HIGHWAY IN MONO COUNTY AT CRESTVIEW AT THE CRESTVIEW SATELLITE MAINTENANCE STATION
QA Service Level1 (Verified on 06/01/2017)

Sample Information

Sample Taken Date07/06/2017 Sample Unique Key7
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/13/2017
Sample typeQuality Assurance A brief description of the sampleF1554 Gr. 55 Anchor Rod
The quantity of what the sample constitutes1 Lot of 66 From where was the sample collectedManufacturer
First name of sampler or witnessed byStacey Last name of sampler or witnessed byDavis
Title of samplerQAI Telephone number of sampler5624806984
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility namePortland Bolt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB362-067-17 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)N/A
Heat Number(s)105916 Nut Mfg. Lot Number(s)24501-6214161505
Washer Mfg. Lot Number(s)Melt No U9769 Bolt SpecificationF1554, Gr 55
Bolt Length(s)40" Nut SpecificationA563 DH
Washer SpecificationASTM F436 FinishHDG
Diameter/Size3/4"" Bolt Mfg. Lot NumberN/A
Rocap Test Requirement(s)None Lubricant Requirements(s)Yes

Submitted Tests

DIME Test IDTest MethodTester NameTesting LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2017-07-06-7-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)BrianCT HQ - Sacramento Structural Materials Testing Laboratory07/18/2017Brian
Yes
07/26/2017Nut Proof Load
2017-07-06-7-2ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)FredCT HQ - Sacramento Structural Materials Testing Laboratory07/18/2017Fred
Yes
07/26/2017
2017-07-06-7-3ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)FredCT HQ - Sacramento Structural Materials Testing Laboratory07/18/2017Fred
Yes
07/26/2017
2017-07-06-7-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory07/19/2017Brian Ewing
Yes
07/26/2017
2017-07-06-7-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory07/19/2017Brian Ewing
Yes
07/26/2017
2017-07-06-7-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory07/19/2017Brian Ewing
Yes
07/26/2017
2017-07-06-7-7ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory07/19/2017Brian Ewing
Yes
07/26/2017
2017-07-06-7-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory07/19/2017Brian Ewing
Yes
07/26/2017
2017-07-06-7-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory07/19/2017Brian Ewing
Yes
07/26/2017
2017-07-06-7-10ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)Brian EwingCT HQ - Sacramento Structural Materials Testing Laboratory07/19/2017Brian Ewing
Yes
07/26/2017

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2017-07-06-7-1 ASTM F606-14a (Verified)
DIME Test ID: 2017-07-06-7-2 ASTM A370-15 (Verified)
DIME Test ID: 2017-07-06-7-3 ASTM A370-15 (Verified)
DIME Test ID: 2017-07-06-7-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-06-7-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-06-7-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-06-7-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-06-7-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-06-7-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-07-06-7-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-13 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-14 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-15 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-16 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-17 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-18 ASTM B499-14 (Verified)
DIME Test ID: 2017-07-06-7-19 ASTM E18-15 (Verified)
DIME Test ID: 2017-07-06-7-20 ASTM E18-15 (Verified)