Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2017-06-21-1
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 211718
DEA: 120H5304
EFIS: 1213000147 |
|---|
| DIST-CO-RTE-PM | 12-ORA-5-6.8,22.8 |
|---|
| Award Date | 11/10/2016 |
|---|
| Closeout Date | 08/27/2018 |
|---|
| Work Description | BRIDGE RAIL UPGRADE AND DECK REPLACEMENT |
|---|
| Location Description | ORANGE COUNTY IN SAN JUAN CAPISTRANO AND IRVINE AT NORTHBOUND CAMINO LAS RAMBLAS LOOP ON RAMP AND NEAR BEE CANYON CREEK |
|---|
| QA Service Level | 1 (Verified on 01/18/2017) |
|---|
Sample Information
| Sample Taken Date | 06/21/2017 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 06/26/2017 |
|---|
| Sample type | Quality Assurance |
A brief description of the sample | A325 MG |
|---|
| The quantity of what the sample constitutes | 16 and 36 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | Greg |
Last name of sampler or witnessed by | Johnston |
|---|
| Title of sampler | CA METS QA Inspector |
Telephone number of sampler | 9165247768 |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | Structural and Steel Products |
Transportation Laboratory (TL) Number | Unknown |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 170613B
170613A
|
|---|
| Heat Number(s) | NF15102338
CR10356300
|
Nut Mfg. Lot Number(s) | 38621366009A
3A
|
|---|
| Washer Mfg. Lot Number(s) | 21445870
512224
|
Bolt Specification | A325 |
|---|
| Bolt Length(s) | 2 1/2" 2 1/4" |
Nut Specification | A563 |
|---|
| Washer Specification | F436 |
Finish | MG |
|---|
| Diameter/Size | 3/4 5/8 |
Bolt Mfg. Lot Number | DL16105190
NF15101077
|
|---|
| Rocap Test Requirement(s) | Yes |
Lubricant Requirements(s) | Yes |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2017-06-21-1-1 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-2 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-4 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-6 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-7 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-8 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-10 | ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
| 2017-06-21-1-11 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/27/2017 | Arnold Viken | Yes | 07/05/2017 | |
|
28188281892819128192281932819428195281962819728198
