Owner Lab
- CT QASI - Bay Area Field Laboratory
DIME Sample ID 2017-05-24-1
Sample is locked from editing. info
Project Information
| Project Identifiers | Project ID: 211803
DEA: 120M6104
EFIS: 1212000121 |
|---|
| DIST-CO-RTE-PM | 12-ORA-55,57,91-17.5/17.9;15.2/16.0;5.8/6.8;8.7/R9.5 |
|---|
| Award Date | 12/21/2016 |
|---|
| Closeout Date | 06/21/2021 |
|---|
| Work Description | INSTALL ADDITIONAL LIGHTING AT SEPARATIONS AND UPGRADE GUARDRAIL |
|---|
| Location Description | ORANGE COUNTY IN ANAHEIM ON ROUTES 55, 57, 91 AT ROUTE 91/57 SEPARATION AND ROUTE 91/55 SEPARATION |
|---|
| QA Service Level | 1 (Verified on 01/12/2017) |
|---|
Sample Information
| Sample Taken Date | 05/24/2017 |
Sample Unique Key | 1 |
|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 05/24/2017 |
|---|
| Sample type | Verification |
A brief description of the sample | F1554 Grade 55 HDG Anchor Bolts |
|---|
| The quantity of what the sample constitutes | 3 |
From where was the sample collected | Fabricator |
|---|
| First name of sampler or witnessed by | David |
Last name of sampler or witnessed by | Flygare |
|---|
| Title of sampler | CALTRANS METS QA INSPECTOR |
Telephone number of sampler | 801-669-2984 |
|---|
| Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
|---|
| The fabricator/manufacturer/facility name | EDSCO |
Transportation Laboratory (TL) Number | C719137 |
|---|
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B76-047-17 |
Structure unique identifier | Not set |
|---|
| Structure name | Not set |
|---|
Material Information
| Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | n/a |
|---|
| Heat Number(s) | 3068915 |
Nut Mfg. Lot Number(s) | Ameribolt W1916, 57338 |
|---|
| Washer Mfg. Lot Number(s) | wrought 299932 |
Bolt Specification | F1554 Gr.55 |
|---|
| Bolt Length(s) | 4'-5" |
Nut Specification | A563-DH |
|---|
| Washer Specification | F436 |
Finish | HDG/plain |
|---|
| Diameter/Size | 2 1/2" |
Bolt Mfg. Lot Number | n/a |
|---|
| Rocap Test Requirement(s) | none |
Lubricant Requirements(s) | |
|---|
Submitted Tests
| DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
| 2017-05-24-1-1 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Arnold | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold | Yes | 06/13/2017 | |
|
| 2017-05-24-1-2 | ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample) | Arnold | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold | Yes | 06/13/2017 | |
|
| 2017-05-24-1-3 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold Viken | Yes | 06/13/2017 | |
|
| 2017-05-24-1-4 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold Viken | Yes | 06/13/2017 | |
|
| 2017-05-24-1-5 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold Viken | Yes | 06/13/2017 | |
|
| 2017-05-24-1-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold Viken | Yes | 06/13/2017 | |
|
| 2017-05-24-1-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold Viken | Yes | 06/13/2017 | |
|
| 2017-05-24-1-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold Viken | Yes | 06/13/2017 | |
|
| 2017-05-24-1-9 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold Viken | Yes | 06/13/2017 | |
|
| 2017-05-24-1-10 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 06/02/2017 | Arnold Viken | Yes | 06/13/2017 | |
|
27242272432724427245272462724727248272492725027251
