DIME » All Projects » Project - DEA: 024H0504 » Sample 2024-10-07-81 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2024-10-07-81

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 995055
DEA: 024H0504
EFIS: 0218000080
DIST-CO-RTE-PM02-SHA-273,299-18.5/18.7,24.1/30.3
Award Date11/16/2023
Closeout DateNot set
Work DescriptionPLACE RHMA, HMA, MINOR CONCRETE, AND REPLACE AC SURFACING.
Location DescriptionSHASTA COUNTY IN AND NEAR REDDING ON ROUTE 273 FROM 0.5 MILE NORTH OF SULPHUR CREEK BRIDGE TO 0.2 MILE SOUTH OF TWIN VIEW BOULEVARD AND ON ROUTE 299 FROM 0.2 MILE WEST OF HILLTOP DRIVE TO 0.1 MILE EAST OF HOOTENANNY LANE
QA Service Level1 (Verified on 10/09/2023)

Sample Information

Sample Taken Date10/07/2024 Sample Unique Key81
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/08/2024
Sample typeProduction Start-Up A brief description of the sample1/2 HMA Type A
The quantity of what the sample constitutes PSE 16 boxs From where was the sample collectedManufacturer
First name of sampler or witnessed byCindy Last name of sampler or witnessed byBryant
Title of samplerTET Telephone number of sampler
Laboratory sample identificationD79749 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis Inc. - Northstate Asphalt (Redding CA) Transportation Laboratory (TL) Number858519
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2024-10-07-81-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Josh Murphy , CT D02 - Redding Northern Regional Laboratory10/08/2024Colt Sweeny
Yes
10/28/2024Gmm=2.502
2024-10-07-81-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Josh Murphy , CT D02 - Redding Northern Regional Laboratory10/10/2024Colt Sweeny
Yes
10/28/2024Gmb=2.417
2024-10-07-81-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Josh Murphy , CT D02 - Redding Northern Regional Laboratory10/28/2024Colt Sweeny
Yes
10/28/2024Pa=3.4
2024-10-07-81-4AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Josh Murphy , CT D02 - Redding Northern Regional Laboratory10/22/2024Colt Sweeny
Yes
10/28/2024S1=174 psi, S2=182 psi, TSR=105%
2024-10-07-81-5AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Sean Mcwithey, CT D02 - Redding Northern Regional Laboratory10/28/2024Colt Sweeny
Yes
10/28/2024Pb=5.19%

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-10-07-81-1 AASHTO T209-12 (Verified)
DIME Test ID: 2024-10-07-81-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2024-10-07-81-3 AASHTO T269-14 (Verified)
DIME Test ID: 2024-10-07-81-4 AASHTO T283-14 (Verified)
DIME Test ID: 2024-10-07-81-5 AASHTO T308-10 (Verified)