Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2017-03-15-3
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 8196 DEA: 59912684 |
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | |
Location Description | |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 03/15/2017 |
Sample Unique Key | 3 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 03/15/2017 |
Sample type | Quality Assurance |
A brief description of the sample | A325 HDG Rocap Assembiy |
The quantity of what the sample constitutes | 9 |
From where was the sample collected | Distributor |
First name of sampler or witnessed by | Amy |
Last name of sampler or witnessed by | Bihary |
Title of sampler | Unknown |
Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Hodell-Natco Nucor Prestige |
Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | 3263-031417 |
Heat Number(s) | |
Nut Mfg. Lot Number(s) | 375883A |
Washer Mfg. Lot Number(s) | D3205 |
Bolt Specification | A325 |
Bolt Length(s) | 5.5 |
Nut Specification | A563 |
Washer Specification | F436 |
Finish | HDG |
Diameter/Size | 1 |
Bolt Mfg. Lot Number | 366321A |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2017-03-15-3-1 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-2 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-3 | ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-4 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-5 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-6 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-7 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-8 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-9 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
2017-03-15-3-10 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 03/20/2017 | Arnold Viken | Yes | 03/28/2017 | | |
24039240402404124042240432404424045240462404724048
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
No results found. |
Test File Attachments
DIME Test ID: 2017-03-15-3-1 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-03-15-3-2 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-03-15-3-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2017-03-15-3-4 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-5 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-6 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-7 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-8 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-9 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-10 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-11 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-12 ASTM B499-14 (Verified)
DIME Test ID: 2017-03-15-3-13 ASTM E18-15 (Verified)
DIME Test ID: 2017-03-15-3-14 ASTM E18-15 (Verified)
DIME Test ID: 2017-03-15-3-15 ASTM F606-14a (Verified)
DIME Test ID: 2017-03-15-3-16 ASTM F606-14a (Verified)