Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-10-11-29
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 993387 DEA: 07323404 EFIS: 0716000064 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5-R59.5/R67.9 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | PLACE CULVERT, REPLACE DRAINAGE SYSTEM, RECONST ROADWAY & EMBANKMENT. |
| Location Description | LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM LAKE HUGHES ROAD UNDERCROSSING TO 1.9 MILES NORTH OF TEMPLIN HIGHWAY UNDERCROSSING |
| QA Service Level | 1 (Verified on 12/06/2021) |
Sample Information
| Sample Taken Date | 10/11/2024 | Sample Unique Key | 29 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/15/2024 |
| Sample type | Verification | A brief description of the sample | 3/4'' WMA A SP R25 .50%EVO |
| The quantity of what the sample constitutes | 4Bags of combined Agg (3/4, 1/2, 3/8, dust,state sand), 2bags of Rap, 4 Qts of PG 58-16,1QT LAST | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | John | Last name of sampler or witnessed by | Mejiah |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | vulcan materials COMPANY | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | VULCAN MATERRIALLLS COMPANY | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | 220200W | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2024-10-11-29-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 11/05/2024 | David Padilla | No | Info | ||
| 2024-10-11-29-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/21/2024 | David Padilla | No | Info | ||
| 2024-10-11-29-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Siegfried Mendoza, CT D08 - Fontana Southern Regional Laboratory | 10/23/2024 | David Padilla | No | Info | ||
| 2024-10-11-29-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 11/05/2024 | David Padilla | No | Info | ||
| 2024-10-11-29-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/24/2024 | David Padilla | No | Info | ||
| 2024-10-11-29-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 11/26/2024 | David Padilla | No | Info | ||
| 2024-10-11-29-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 11/05/2024 | David Padilla | No | Info | ||
| 2024-10-11-29-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 11/05/2024 | David Padilla | No | Rap gradation after ignition | Info | |
| 2024-10-11-29-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 11/05/2024 | David Padilla | No | Comb. Virgin Aggregate gradation w/ RAP gradation correlation factor | Info | |
| 2024-10-11-29-12 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | C.H., CT D08 - Fontana Southern Regional Laboratory | 10/18/2024 | David Tran | No | Combined Virgin Aggregate Gradation | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2024-10-11-29-2 AASHTO T84-14
DIME Test ID: 2024-10-11-29-3 AASHTO T85-13
DIME Test ID: 2024-10-11-29-4 AASHTO T96-02r10
DIME Test ID: 2024-10-11-29-5 AASHTO T176-08
DIME Test ID: 2024-10-11-29-6 AASHTO T304-11
DIME Test ID: 2024-10-11-29-7 AASHTO T335-09r13
DIME Test ID: 2024-10-11-29-8 ASTM D4791-10
DIME Test ID: 2024-10-11-29-9 CTM 202-November 2011
DIME Test ID: 2024-10-11-29-10 CTM 202-November 2011
DIME Test ID: 2024-10-11-29-12 AASHTO T27-14