Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
DIME Sample ID 2016-12-08-7
Sample is locked from editing. info
Project Information
Project Identifiers | Project ID: 211597 DEA: 060M2504 EFIS: 0612000096 |
DIST-CO-RTE-PM | 06-FRE-198-35.3/35.6 |
Award Date | 10/06/2016 |
Closeout Date | 11/29/2017 |
Work Description | REPLACE BRIDGE DECK AT CALIFORNIA AQUEDUCT BRIDGE |
Location Description | FRESNO COUNTY NEAR HURON FROM 0.1 MILE WEST TO 0.1 MILE EAST OF CALIFORNIA AQUEDUCT BRIDGE |
QA Service Level | 1 (Verified on 12/30/2016) |
Sample Information
Sample Taken Date | 12/08/2016 |
Sample Unique Key | 7 |
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes |
Date that the sample was received by the laboratory/organization performing the testing | 02/15/2017 |
Sample type | Quality Assurance |
A brief description of the sample | fastener Assembly |
The quantity of what the sample constitutes | 25 |
From where was the sample collected | Distributor |
First name of sampler or witnessed by | Scott |
Last name of sampler or witnessed by | Leavitt |
Title of sampler | Unknown |
Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown |
Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Universal Industrial Sales |
Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | S2804917 |
Structure unique identifier | Not set |
Structure name | Not set |
---|
Material Information
Material Type | SMTL TM3 - Fastener Assembly |
Rocap Number(s) | |
Heat Number(s) | Lot BG0609 |
Nut Mfg. Lot Number(s) | 15-40-006 |
Washer Mfg. Lot Number(s) | D2022 |
Bolt Specification | ASTM A325 |
Bolt Length(s) | 5.5 |
Nut Specification | ASTM A563 |
Washer Specification | ASTM F436 |
Finish | ASTM A153/F2329 - Hot Dip |
Diameter/Size | 3/4 |
Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | |
Lubricant Requirements(s) | |
Submitted Tests
DIME Test ID | Test Method | Tester Name | Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
2016-12-08-7-11 | ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/15/2017 | Arnold Viken | Yes | 02/24/2017 | | |
2016-12-08-7-12 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/15/2017 | Arnold Viken | Yes | 02/24/2017 | | |
2016-12-08-7-13 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/15/2017 | Arnold Viken | Yes | 02/24/2017 | | |
2016-12-08-7-14 | ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/15/2017 | Arnold Viken | Yes | 02/24/2017 | | |
2016-12-08-7-15 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/15/2017 | Arnold Viken | Yes | 02/24/2017 | | |
2016-12-08-7-16 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/15/2017 | Arnold Viken | Yes | 02/24/2017 | | |
2016-12-08-7-17 | ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage) | Arnold Viken | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/15/2017 | Arnold Viken | Yes | 02/24/2017 | | |
2016-12-08-7-18 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | Arnold | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/16/2017 | Arnold | Yes | 02/24/2017 | A325 | |
2016-12-08-7-19 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load) | Arnold | CT HQ - Sacramento Structural Materials Testing Laboratory | 02/16/2017 | Arnold | Yes | 02/24/2017 | Nut Proof Load | |
233482334923350233512335223353233542336523366