Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-09-27-33
Project Information
Project Identifiers | Project ID: 1000101 DEA: 081J2904 EFIS: 0818000015 |
---|---|
DIST-CO-RTE-PM | 08-RIV-215-25.0/R31.2 |
Award Date | 06/18/2024 |
Closeout Date | Not set |
Work Description | RHMA, HMA, REPLACE AC SURFACING, AND COLD PLANE AC PVMT. |
Location Description | RIVERSIDE COUNTY IN AND NEAR PERRIS FROM 0.1 MILE SOUTH OF SAN JACINTO RIVER BRIDGE TO 0.3 MILE NORTH OF RAMONA EXPRESSWAY |
QA Service Level | 1 (Verified on 05/15/2024) |
Sample Information
Sample Taken Date | 09/27/2024 | Sample Unique Key | 33 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/30/2024 |
Sample type | Verification | A brief description of the sample | 3/8" HMA-A-SP R25 0.5% LAS |
The quantity of what the sample constitutes | Hotdrop | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Maryanna | Last name of sampler or witnessed by | Landaverde |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0503A-24 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Martin Marietta Lake Elsinore | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 9133-0098, 91-33-0035 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Hotdrop | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
The concrete mix design number | 53817195 | Lot number | |
Sublot number | Aggregate Mix Number |
Combined Gradation Report Information
Combined Gradation Report Id | Bin Index | Dime Test Id |
---|---|---|
No assigned tests for this sample. |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2024-09-27-33-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | M.Campos/D.T., CT D08 - Fontana Southern Regional Laboratory | 10/10/2024 | Satish Jain | No | Combined Virgin Aggregate Gradation | Info | |
2024-09-27-33-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Robert Jarquin, CT D08 - Fontana Southern Regional Laboratory | 10/05/2024 | Satish Jain | No | Info | ||
2024-09-27-33-3 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | David Tran, CT D08 - Fontana Southern Regional Laboratory | 10/05/2024 | Satish Jain | No | Info | ||
2024-09-27-33-4 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/05/2024 | Satish Jain | No | Info | ||
2024-09-27-33-5 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 10/04/2024 | Satish Jain | No | Info | ||
2024-09-27-33-6 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/04/2024 | Satish Jain | No | Info | ||
2024-09-27-33-7 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/30/2024 | Satish Jain | No | Info | ||
2024-09-27-33-8 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/05/2024 | Satish Jain | No | Info | ||
2024-09-27-33-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/05/2024 | Satish Jain | No | Rap Gradation After Ignition | Info | |
2024-09-27-33-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | M.Campos/David Padilla, CT D08 - Fontana Southern Regional Laboratory | 10/11/2024 | Satish Jain | No | Comb. Virgin Aggregate Gradation W/Rap Gradation Correlation Factors | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2024-09-27-33-1 AASHTO T27-14
DIME Test ID: 2024-09-27-33-2 AASHTO T96-02r10
DIME Test ID: 2024-09-27-33-3 AASHTO T176-08
DIME Test ID: 2024-09-27-33-4 AASHTO T335-09r13
DIME Test ID: 2024-09-27-33-5 AASHTO T84-14
DIME Test ID: 2024-09-27-33-6 AASHTO T85-13
DIME Test ID: 2024-09-27-33-7 ASTM D4791-10
DIME Test ID: 2024-09-27-33-8 AASHTO T304-11
DIME Test ID: 2024-09-27-33-9 CTM 202-November 2011
DIME Test ID: 2024-09-27-33-10 CTM 202-November 2011