Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2024-08-19-107

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1000089
DEA: 024J8904
EFIS: 0223000084
DIST-CO-RTE-PM02-TEH-36-6.0/R12.6
Award Date04/04/2024
Closeout DateNot set
Work DescriptionRHMA (GAP GRADED) OVERLAY WITH REPLACE ASPHALT CONCRETE SURFACING.
Location DescriptionTEHAMA COUNTY NEAR PLATINA FROM 3.3 MILES WEST OF VESTAL ROAD TO 2.3 MILES EAST OF DRY CREEK BRIDGE
QA Service Level1 (Verified on 03/18/2024)

Sample Information

Sample Taken Date08/19/2024 Sample Unique Key107
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/09/2024
Sample typeProduction Start-Up A brief description of the sample3/4" Type A HMA w/15% RAP
The quantity of what the sample constitutes16 boxes of 3/4" Type A HMA with RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byUnknown Last name of sampler or witnessed byUnknown
Title of samplerUnknown Telephone number of sampler
Laboratory sample identificationD79708 Linked DIME Sample ID
The fabricator/manufacturer/facility nameKnife River Construction Transportation Laboratory (TL) Number895204
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix Number

Combined Gradation Report Information

Combined Gradation Report IdBin IndexDime Test Id
No assigned tests for this sample.

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2024-08-19-107-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Josh Murphy , CT D02 - Redding Northern Regional Laboratory09/09/2024Colt Sweeny
Yes
09/26/2024Gmm=2.543
2024-08-19-107-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Josh Murphy , CT D02 - Redding Northern Regional Laboratory09/11/2024Colt Sweeny
Yes
09/26/2024Gmb=2.458
2024-08-19-107-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Josh Murphy , CT D02 - Redding Northern Regional Laboratory09/11/2024Colt Sweeny
Yes
09/26/2024Pa=3.4%
2024-08-19-107-4AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Josh Murphy , CT D02 - Redding Northern Regional Laboratory09/26/2024Colt Sweeny
Yes
09/26/2024S1=221 psi, S2=192 psi, TSR=87%
2024-08-19-107-5AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Sean Mcwithey, CT D02 - Redding Northern Regional Laboratory09/16/2024Colt Sweeny
Yes
09/26/2024Pb=4.76%

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-08-19-107-1 AASHTO T209-12 (Verified)
DIME Test ID: 2024-08-19-107-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2024-08-19-107-3 AASHTO T269-14 (Verified)
DIME Test ID: 2024-08-19-107-4 AASHTO T283-14 (Verified)
DIME Test ID: 2024-08-19-107-5 AASHTO T308-10 (Verified)