Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2024-09-23-18
Project Information
Project Identifiers | Project ID: 1000255 DEA: 081N7504 EFIS: 0823000045 |
---|---|
DIST-CO-RTE-PM | 08-SBD-138,189-21.4/R37.8,0.0/5.6 |
Award Date | 06/12/2024 |
Closeout Date | Not set |
Work Description | SLURRY SEAL, TWO-COMPONENT PAINT TRAFFIC STRIPE, REPLACE AC SURFACING. |
Location Description | SAN BERNARDINO COUNTY ON ROUTE 138 FROM BOLINGBROKE ROAD TO ROUTE 18 AND ON ROUTE 189 FROM ROUTE 18 TO ROUTE 173 |
QA Service Level | 1 (Verified on 05/15/2024) |
Sample Information
Sample Taken Date | 09/23/2024 | Sample Unique Key | 18 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/24/2024 |
Sample type | Verification | A brief description of the sample | 3/4'' HMA-A- R15 NO LAS |
The quantity of what the sample constitutes | 2 BAGS Comb AGG, 1 Bag COMB RAP (COURSE & FINE) | From where was the sample collected | Source |
First name of sampler or witnessed by | Maryanna | Last name of sampler or witnessed by | Landaverde |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0492A-24 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | AAA - Corona Quarry/ SJR | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | ALL AMERICAN ASPHALT | The fabricator/manufacturer designation for the sample | |
The plant number | A detailed description of where the material sample was collected | Belt Cut at All American Corona Plant | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 105793 | Lot number | |
Sublot number | Aggregate Mix Number |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2024-09-23-18-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Amir Sarder, CT D08 - Fontana Southern Regional Laboratory | 09/28/2024 | Satish Jain | No | Combined Virgin Aggregate Gradation | Info | |
2024-09-23-18-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 09/26/2024 | Satish Jain | No | Info | ||
2024-09-23-18-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 10/01/2024 | Satish Jain | No | Info | ||
2024-09-23-18-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 09/27/2024 | Satish Jain | No | Info | ||
2024-09-23-18-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | David Tran, CT D08 - Fontana Southern Regional Laboratory | 10/02/2024 | Satish Jain | No | Info | ||
2024-09-23-18-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/28/2024 | Satish Jain | No | Info | ||
2024-09-23-18-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/28/2024 | Satish Jain | No | Info | ||
2024-09-23-18-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 09/28/2024 | Satish Jain | No | Info | ||
2024-09-23-18-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Amir Sarder, CT D08 - Fontana Southern Regional Laboratory | 09/28/2024 | Satish Jain | No | Rap Gradation After Ignition | Info | |
2024-09-23-18-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Amir Sarder, CT D08 - Fontana Southern Regional Laboratory | 10/03/2024 | Satish Jain | No | Comb. Virgin Agg, Gradation W/Rap Gradation Correlation Factors | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2024-09-23-18-1 AASHTO T27-14
DIME Test ID: 2024-09-23-18-2 AASHTO T84-14
DIME Test ID: 2024-09-23-18-3 AASHTO T85-13
DIME Test ID: 2024-09-23-18-4 AASHTO T96-02r10
DIME Test ID: 2024-09-23-18-5 AASHTO T176-08
DIME Test ID: 2024-09-23-18-6 AASHTO T304-11
DIME Test ID: 2024-09-23-18-7 AASHTO T335-09r13
DIME Test ID: 2024-09-23-18-8 ASTM D4791-10
DIME Test ID: 2024-09-23-18-9 CTM 202-November 2011
DIME Test ID: 2024-09-23-18-10 CTM 202-November 2011