Print Report | Back to Sample Detail

Sample Record for 2024-07-26-56

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994246 DEA: 051H6904 EFIS: 0516000140 QA Service Level: 1
DIST-CO-RTE-PM: 05-MON-101-R91.3/98.8,100.3/101.3
Work Description: PLACE RHMA, INSTALL CONCRETE BARRIER AND DRAINAGE SYSTEMS.
Location Description: MONTEREY COUNTY AT AND NEAR PRUNEDALE AND SALINAS FROM 0.3 MILE NORTH OF BORONDA ROAD OVERCROSSING TO 0.4 MILE NORTH OF CRAZY HORSE CANYON ROAD OVERCROSSING AND FROM 0.9 MILE NORTH OF CRAZY HORSE CANYON ROAD OVERCROSSING TO SAN JUAN ROAD OVERCROSSING
Contractor Name: DeSILVA GATES CONSTRUCTION
Contractor Address: 11555 Dublin Blvd, Dublin CA 94568
Resident Engineer: Nash Munes Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-07-26-56
TL Number from the TL Form: C726241
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Assurance
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 07/26/2024
Date that the sample was received by the laboratory/organization performing the testing: 08/06/2024
The quantity of what the sample constitutes: 1 CAN ARB
A brief description of the sample: 1 can PG 64-16 Rubber binder
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: San Joaquin Refinery

Material Information

Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2024-07-26-56-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 08/07/2024
Date Tested: 08/07/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Determination Unworked Penetration
Unworked Penetration 39 0.1 mm

Test 2 of 4

DIME Test ID: 2024-07-26-56-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 08/07/2024
Date Tested: 08/07/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 66 C
Softening Point Sample 2 65 C
Bath Liquid freshly boiled distilled water
Minutes Reaction no data

Test 3 of 4

DIME Test ID: 2024-07-26-56-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 08/07/2024
Date Tested: 08/07/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Temperature 25 C
Final Dial reading (F1) 69 mm
Ball Penetration (P1) 0 mm
Final Dial reading (F2) 73 mm
Ball Penetration (P2) 3 mm
Final Dial reading (F3) 72 mm
Ball Penetration (P3) 4 mm
Resilience 1 31 %
Resilience 2 30 %
Resilience 3 32 %
Average Resilience 31 %
Minutes Reaction no data

Test 4 of 4

DIME Test ID: 2024-07-26-56-4
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 08/07/2024
Date Tested: 07/26/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Test performed by field tech
Test Result Compliance:
Additional Comments When Verified:
Unit system used? SI Units
Test Temperature 190 C
Average Viscosity 2500.0 Pa-s
Minutes Reaction no data