Print Report | Back to Sample Detail

Sample Record for 2016-10-28-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2016-10-28-7
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Sample Organization Contact: (916) 227-7071
Type of Sample: Annual Source Testing
Type of Material: Cementitious
Sample Taken Date: 10/28/2016
Date that the sample was received by the laboratory/organization performing the testing: 10/28/2016
The quantity of what the sample constitutes: 1 Bucket
A brief description of the sample: Unknown
From where was the sample collected: Source
Laboratory sample identification: CM165660
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Spartan

Material Information

Brand: Spartan
Mill: Gujarat India
Type of Cementitious Material: Class F or N Flyash

Test Results

Test 1 of 3

DIME Test ID: 2016-10-28-7-1
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Verified Date: 03/22/2019
Date Tested: 11/29/2016
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Blvd.,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no
Compressive strength of 1st specimen (psi) 3410.25 psi
Compressive strength of 2nd specimen (psi) 4139.25 psi
Compressive strength of 3rd specimen (psi) 4122.75 psi
Average Compressive strength (to nearest 10 psi) 3890 psi

Test 2 of 3

DIME Test ID: 2016-10-28-7-2
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Verified Date: 03/22/2019
Date Tested: 11/29/2016
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Blvd.,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Will control cubes be used per ASTM C311? yes
Compressive strength of 1st specimen (psi) 5117 psi
Compressive strength of 2nd specimen (psi) 5918.25 psi
Compressive strength of 3rd specimen (psi) 4986.5 psi
Average Compressive strength (to nearest 10 psi) 5340 psi
Average Compressive strength (to nearest 10 psi) control group 4770 psi
Strength Activity Index of Portland Cement per ASTM C311 112

Test 3 of 3

DIME Test ID: 2016-10-28-7-3
Test Method: ASTM C430-8: Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
Verified Date: 03/22/2019
Date Tested: 11/03/2016
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Blvd.,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Correction Factor (CF) 0.15
Corrected Residue (Rc) 6.06