Print Report | Back to Sample Detail

Sample Record for 2016-10-05-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 209732 DEA: 072881U4 EFIS: 0714000085 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-210-R16.1/R25.8
Work Description: CONSTRUCT CONCRETE PAVEMENT, PRECAST CONCRETE PANELS, AND SLABS.
Location Description: LOS ANGELES COUNTY IN LA CANADA FLINTRIDGE, GLENDALE AND PASADENA FROM DUNSMORE AVENUE UNDERCROSSING TO NORTH LOS ROBLES AVENUE OVERCROSSING
Contractor Name: FLATIRON WEST, INC.
Contractor Address: 1770 LA COSTA MEADOWS DRIVE, SAN MARCOS, CA 92078
Resident Engineer: Sushil Chaudhari Structure Rep.: Mark Amorsolo

Sample Information

DIME Sample ID: 2016-10-05-10
TL Number from the TL Form: C594910
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 227-7283
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 10/05/2016
Date that the sample was received by the laboratory/organization performing the testing: 10/05/2016
The quantity of what the sample constitutes: 80 drums
A brief description of the sample: polyester resin
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: reichhold azusa

Material Information

Mfg. Lot Number(s): 00001005302
Batch number: 00001005302
Mix number:

Test Results

Test 1 of 1

DIME Test ID: 2016-10-05-10-5
Test Method: CONCLP 3-16: Polyester Resin
Verified Date: 10/24/2016
Date Tested: 10/13/2016
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: larry.mccrum@dot.ca.gov
Organization Phone: (916) 227-7283
General Comments for this Test: bond beam results from supplier
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F 105 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35% 56.4 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi 2835 psi
Styrene ASTM D 2369 40% to 50 % 43 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours 702 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams 0.4 grams

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.