Print Report | Back to Sample Detail

Sample Record for 2024-05-09-52

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994321 DEA: 040K1604 EFIS: 0416000044 QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA,CC-80-R7.6/8.0,0.0/13.5
Work Description: CONSTRUCT RHMA, LIGHTING SYSTEM, AND CONCRETE BARRIER.
Location Description: ALAMEDA AND CONTRA COSTA COUNTIES IN ALBANY AND CROCKETT FROM 0.4 MILE SOUTH OF ALAMEDA COUNTY LINE TO 0.2 MILE SOUTH OF POMONA STREET
Contractor Name: Bay Cities Paving & Grading (Jeff Brandt)
Contractor Address: 1450 CIVIC CT, BLDG B #400, CONCORD, CA 94520
Resident Engineer: Wesley Morrison Structure Rep.: William Sommer

Sample Information

DIME Sample ID: 2024-05-09-52
TL Number from the TL Form:
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Independent Assurance
Type of Material: Aggregate
Sample Taken Date: 05/09/2024
Date that the sample was received by the laboratory/organization performing the testing: 05/09/2024
The quantity of what the sample constitutes: 2 containers
A brief description of the sample: Class2 AB Recycle
From where was the sample collected: Job Site
Laboratory sample identification: Rich_24_056
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Vallejo

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-48-0002
The fabricator's/manufacturer's product name for the sample: 3/4 Recycled Class 2 AB
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Compactions site
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2024-05-09-52-1
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 05/16/2024
Date Tested: 05/09/2024
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.13
Highest adjust wet density 2.2
Relative compaction 97
% Moisture 10.0 %
Optimum Moisture 12.0 %

Test 2 of 2

DIME Test ID: 2024-05-09-52-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 05/16/2024
Date Tested: 05/09/2024
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.13
Highest adjust wet density 2.2
Relative compaction 97
% Moisture 10.0 %
Optimum Moisture 14.0 %