Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215349 DEA: 081C0824 EFIS: 0816000087
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-10-R104.9/R134.2
Work Description: PLACE HMA (TYPE A), JPCP AND IMPORTED BORROW.
Location Description: RIVERSIDE COUNTY FROM ROUTE 10/177 SEPARATION TO 1.1 MILES WEST OF WILEY'S WELL RD OC
Contractor Name: FISHER SAND & GRAVEL CO.
Contractor Address: 1302 W DRIVERS WAY, TEMPE, AZ. 85284
Resident Engineer: Khoi Vu Structure Rep.: Shukri Abouazra
DIME Sample ID: 2024-04-15-26
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Per Request
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 04/15/2024
Date that the sample was received by the laboratory/organization performing the testing: 04/16/2024
The quantity of what the sample constitutes: 2
A brief description of the sample: #6 Rebar
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Unknown
DIME Test ID: 2024-04-15-26-1
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 04/17/2024
Date Tested: 04/17/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
2
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | | 0.35 | 0.09621 | 46814 | 79405 | 24.9 | aauvinen | | | 0.353 | 0.09787 | 48340 | 79393 | 26.2 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 F
|
DIME Test ID: 2024-04-15-26-2
Test Method: ASTM E18-20: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 04/17/2024
Date Tested: 04/17/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
0
|
|
Size
|
0
|
|
Bolt Length
|
0
|
|
Hardness Reading Scale
|
B Scale
|
|
Hardness Reading Average
|
82.22
|
|
Spacing
|
Ok
|
DIME Test ID: 2024-04-15-26-3
Test Method: ASTM E415-21: Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
Verified Date: 04/17/2024
Date Tested: 04/17/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Content, carbon
|
0.340 %
|
|
Content, Si
|
0.0527 %
|
|
Content, Mn
|
0.466 %
|
|
Content, P
|
0.0077 %
|
|
Content, S
|
0.0244 %
|
|
Content, Cr
|
0.158 %
|
|
Content, Mo
|
0.0458 %
|
|
Content, Al
|
0.0072 %
|
|
Content, Co
|
0.0154 %
|
|
Content, Copper
|
0.289 %
|
|
Content, Nb
|
0.001 %
|
|
Content, Ti
|
0.0011 %
|
|
Content, V
|
0.00050 %
|
|
Content, Lead
|
0.0183 %
|
|
Content, Boron
|
0.00079 %
|
|
Content, Fe
|
98.3 %
|
|
Content, Ni
|
0.0072 %
|
