DEPARTMENT OF TRANSPORTATION
DIVISION OF ENGINEERING SERVICES
MATERIALS ENGINEERING AND TESTING SERVICES
Concrete Materials Testing Branch
5900 Folsom Blvd.
Sacramento, CA 95819
916-227-7205
Contract # 040120T4 Cty SF Rte 80 PM 12.6/13.9
Vendor #
|
Gavin Newsom, Governor |
DEPARTMENT OF TRANSPORTATIONDIVISION OF ENGINEERING SERVICES MATERIALS ENGINEERING AND TESTING SERVICES Concrete Materials Testing Branch 5900 Folsom Blvd. Sacramento, CA 95819 916-227-7205 |
Contract # 040120T4 Cty SF Rte 80 PM 12.6/13.9 Vendor # |
|
REPORT OF LABORATORY TESTING |
||||
|
Resident Engineer: |
Tom Larwin |
Date Reported: |
09/21/2016 |
|
|
Address: |
TL Number: |
Unknown |
||
|
City: |
||||
|
Project Name: CONSTRUCT BRIDGE, ROADWAYS, ELECTRICAL, BUILDINGS AND REMOVE BRIDGES |
||||
|
Prime Contractor: CALIFORNIA ENGINEERING CONTRACTORS, INC. |
||||
|
Sample Taken Date: |
08/24/2016 |
Mix Design: |
D101C5E |
|
|
Contractor: Unknown |
Location : THE CITY AND COUNTY OF SAN FRANCISCO FROM THE YERBA BUENA TUNNEL TO 1.3 KM EAST OF THE YERBA BUENA TUNNEL |
|||
|
Structure unique identifier: 340006 |
||||
|
Structure name: SFOBB Bikepath |
||||
|
Location of Pour: Bike Path Deck |
||||
The following testing has been tested in accordance with:
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
|---|---|---|---|---|
| 1 | 28.27 | 6.00 | 104025 | 1 |
| 2 | 28.27 | 6.00 | 106750 | 1 |
DIME Test ID: 2016-08-24-10-1
Number of specimens: 2
Compressive strength (to nearest 10 psi): 3730
Comment on any defect in either specimen or caps (Max 250 Characters):
Age of specimen: 8 days
Certified By: Mike Mullins
ASTM C39-10 : Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Capped in accordance with ASTM C617/CTM521
Cured in accordance with ASTM C511
| Specimen | Cross sectional area of cylinder (in^2) | Average diameter of cylinder (in) | Compressive strength of cylinder (psi) | Maximum load on cylinder (lb) | Type of fracture pattern of cylinder |
|---|---|---|---|---|---|
| 1 | 28.46 | 6.02 | 5262.3 | 149764 | 1 |
| 2 | 28.37 | 6.01 | 5286.8 | 149986 | 1 |
DIME Test ID: 2016-08-24-10-2
Number of specimens: 2
Compressive strength (to nearest 10 psi): 5270
Age of specimen: 28 days
Certified By: Larry McCrum
|
*Subject to final inspection by the Resident Engineer. |
|
TL- Report of Laboratory Testing