Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215425 DEA: 06360244 EFIS: 0613000005
QA Service Level: 1
DIST-CO-RTE-PM: 06-TUL-99-30.6/35.2
Work Description: Widen Freeway & Bridge Construction (Concrete Bridge)
Location Description:
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 13170 TELFAIR AVE, SYLMAR, CA, 91342
Resident Engineer: Javier Huerta Structure Rep.: Ramandeep Guraya
DIME Sample ID: 2024-04-11-14
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Sample Organization Contact: 661-549-8281
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/11/2024
Date that the sample was received by the laboratory/organization performing the testing: 04/11/2024
The quantity of what the sample constitutes: L7SL3
A brief description of the sample: 3/4 HMA-A PG70-10
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name: NB TUL 99 N of Ave 264 Tagus
The fabricator/manufacturer/facility name: Martin Mariatta
DIME Test ID: 2024-04-11-14-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/12/2024
Date Tested: 04/12/2024
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
Method A
|
Mass of the specimen basket assembly
|
2913.9 g
|
Mass of the specimen and specimen basket assembly prior to ignition
|
4961.1 g
|
Mass of HMA Sample prior to ignition
|
2047.2 g
|
Corrected Asphalt Binder Content
|
4.44 %
|
Mass Loss
|
103.6 g
|
Mass of aggregate remaining after ignition
|
1943.6 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.47 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.15 %
|
Test Temperature
|
538 F
|
DIME Test ID: 2024-04-11-14-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/12/2024
Date Tested: 04/12/2024
Submitted By Organization: CT D06 - Bakersfield Field Laboratory
Organization Address: 1824 Norris Road,
Organization City: Bakersfield
Organization State: CA
Organization Zipcode: 93308
Organization Email: kulwinder.rai@dot.ca.gov
Organization Phone: (661) 549-8281
General Comments for this Test: 3A= 93.5, 3B= 92.1, 3C= 91.7
Test Result Compliance: complies
Additional Comments When Verified:
Bulk Specific Gravity
|
2.529
|
Bulk Specific Gravity 2
|
2.489
|
Bulk Specific Gravity 3
|
2.480
|
Average Bulk Specific Gravity
|
2.499
|