Print Report | Back to Sample Detail

Sample Record for 2016-08-25-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 1095 DEA: 033797U4 EFIS: 0300020155 COOP: 030466 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC,SAC-80-R10.9/R11.7,M0.0/M10.4
Work Description: REPLACE PCCP, PLACE HMA, WIDEN BRIDGES AND CONSTRUCT SOUNDWALLS.
Location Description: YOLO AND SACRAMENTO COUNTIES IN AND NEAR WEST SACRAMENTO AND SACRAMENTO FROM ROUTE 80/84 SEPARATION TO WATT AVENUE OVERCROSSING
Contractor Name: BAY CITIES / MYERS JV
Contractor Address: P O BOX 2948, RANCHO CORDOVA, CA 95742-6811
Resident Engineer: Meshack Okpala Structure Rep.: Jack Rothaus

Sample Information

DIME Sample ID: 2016-08-25-7
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM7 - Epoxy Coated Rebar
Sample Taken Date: 08/25/2016
Date that the sample was received by the laboratory/organization performing the testing: 08/29/2016
The quantity of what the sample constitutes: 4
A brief description of the sample: Epoxy Coated Rebar
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: JC Supply

Material Information

Rebar Heat Number(s): PL15206448, 507615
Rebar Epoxy Batch Number(s): 6E11C182
Rebar Coating Specification: ASTM A934
Rebar Size (#): #6/19mm
Rebar Coating Color: Purple
Rebar Manufacturer: Cascade Steel,Nucor
Rebar Coater: JC Supply And Manufacturing
Rebar Powder Manufacturer: 3M
Release Number: Unknown
Quality Assurance Code: Unknown
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2016-08-25-7-1
Test Method: ASTM A934-13: Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars (Epoxy-Coating)
Verified Date: 08/31/2016
Date Tested: 08/30/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: S1 Block1 Average is:3.47m, 3.66m, 4.12m; average 3.75m.
Test Result Compliance: does not comply
Additional Comments When Verified:
Lower spec. limit LSL 7 mils
Upper spec. limit USL 12 mils
Bar # for First Bar B1
Bar # for Second Bar B2
First Bar Mean 7.81 mils
Second Bar Mean 7.46 mils
Total mean value 7.63 mils

Test 2 of 4

DIME Test ID: 2016-08-25-7-2
Test Method: ASTM A934-13: Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars (Holiday Bend)
Verified Date: 08/31/2016
Date Tested: 08/30/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: B1, B2
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 3
Total Length 5 ft
Holidays Per Linear Foot of Bar 0.6 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass

Test 3 of 4

DIME Test ID: 2016-08-25-7-3
Test Method: ASTM A934-13: Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars (Epoxy-Coating)
Verified Date: 08/31/2016
Date Tested: 08/30/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Lower spec. limit LSL no data
Upper spec. limit USL no data
Bar # for First Bar B3
Bar # for Second Bar B4
First Bar Mean 9.18 mils
Second Bar Mean 9.47 mils
Total mean value 9.33 mils

Test 4 of 4

DIME Test ID: 2016-08-25-7-4
Test Method: ASTM A934-13: Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars (Holiday Bend)
Verified Date: 08/31/2016
Date Tested: 08/30/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: B3, B4
Test Result Compliance:
Additional Comments When Verified:
Total Number of Holiday 0
Total Length 5 ft
Holidays Per Linear Foot of Bar 0 holiday pe
Holiday Test Pass/Fail Pass
Bend Test Pass/Fail Pass