Print Report | Back to Sample Detail

Sample Record for 2023-10-18-76

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994609 DEA: 112N1194 EFIS: 1121000148 QA Service Level: 1
DIST-CO-RTE-PM: 11-SD-94-14.9/29.2
Work Description: MICROSURFACING, RUMBLE STRIP, PAVEMENT MARKING, & SHOULDER BACKING.
Location Description: SAN DIEGO COUNTY NEAR JAMUL FROM JUNCTION ROUTE 54/94 TO 0.7 MILE EAST OF DULZURA CREEK
Contractor Name: VSS INTERNATIONAL, INC.
Contractor Address: 3785 Channel Dr., West Sacramento CA, 95605
Resident Engineer: Michael Stewart Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-10-18-76
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 688-1570
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 10/18/2023
Date that the sample was received by the laboratory/organization performing the testing: 02/27/2024
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: Type III Micro-surfacing
From where was the sample collected: Source
Laboratory sample identification: 0215-S
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: VSSI

Material Information

Source Identification (SMARA, name of Pit or Job Site): Plant
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Micro-surfacing
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2023-10-18-76-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 03/27/2024
Date Tested: 04/02/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test: Test results are within specification limits.
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? Combined Gradation
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 100 %
Cumulative percent passing the #4 sieve 84 %
Cumulative percent passing the #8 sieve 54 %
Cumulative percent passing the #16 sieve 38 %
Cumulative percent passing the #30 sieve 27 %
Cumulative percent passing the #50 sieve 17 %
Cumulative percent passing the #100 sieve 10 %
Cumulative percent passing the #200 sieve 5.7 %

Test 2 of 2

DIME Test ID: 2023-10-18-76-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 03/27/2024
Date Tested: 04/02/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test: Test results are within specification limits.
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 72