Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 7285 DEA: 040120T4 EFIS: 0400000027
QA Service Level: 1
DIST-CO-RTE-PM: 04-SF-80-12.6/13.9
Work Description: CONSTRUCT BRIDGE, ROADWAYS, ELECTRICAL, BUILDINGS AND REMOVE BRIDGES
Location Description: THE CITY AND COUNTY OF SAN FRANCISCO FROM THE YERBA BUENA TUNNEL TO 1.3 KM EAST OF THE YERBA BUENA TUNNEL
Contractor Name: CALIFORNIA ENGINEERING CONTRACTORS, INC.
Contractor Address: 20 HAPPY VALLEY ROAD, PLEASANTON, CA 94566
Resident Engineer: Tom Larwin Structure Rep.: Mehran Ardakanian
DIME Sample ID: 2024-03-12-35
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Polyester
Sample Taken Date: 03/12/2024
Date that the sample was received by the laboratory/organization performing the testing: 03/13/2024
The quantity of what the sample constitutes: 2 tankers
A brief description of the sample: 1 gallon can / PPC 1121 RESIN
From where was the sample collected: Source
Laboratory sample identification: 000046KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia
DIME Test ID: 2024-03-12-35-1
Test Method: ASTM D2196-Feb15: Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
Verified Date: 05/17/2024
Date Tested: 04/18/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
DIME Test ID: 2024-03-12-35-2
Test Method: ASTM D1475-Nov13: Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Verified Date: 05/17/2024
Date Tested: 04/18/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Density Units
|
pounds/gallons
|
|
Liquid Density (pounds per gallon)
|
9
|
DIME Test ID: 2024-03-12-35-3
Test Method: ASTM D638-Dec14: Standard Test Method for Tensile Properties of Plastics
Verified Date: 05/17/2024
Date Tested: 03/22/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of specimens tested
|
6
|
|
Conditioning procedure
|
18/25/50+5/70
|
|
Speed of testing
|
0.45 in/min
|
|
Sample 1 Width
|
0.481 in
|
|
Sample 1 Ultimate strength
|
3663.2 psi
|
|
Sample 1 Thickness
|
0.251 in
|
|
Sample 1 Area
|
0.1207 in^2
|
|
Sample 1 Ultimate Strength Actual
|
442.15 lbs
|
|
Sample 1 percent elongation
|
66 %
|
|
Sample 1 Time
|
0 MM:SS
|
|
Sample 2 Width
|
0.481 in
|
|
Sample 2 Thickness
|
0.243 in
|
|
Sample 2 Area
|
0.1169 in^2
|
|
Sample 2 Ultimate strength
|
3661.2 psi
|
|
Sample 2 Ultimate Strength Actual
|
428 lbs
|
|
Sample 2 percent elongation
|
57 %
|
|
Sample 2 Time
|
0 MM:SS
|
|
Sample 3 Width
|
0.48 in
|
|
Sample 3 Thickness
|
0.258 in
|
|
Sample 3 Area
|
0.1238 in^2
|
|
Sample 3 Ultimate strength
|
3598.5 psi
|
|
Sample 3 Ultimate Strength Actual
|
445.5 lbs
|
|
Sample 3 percent elongation
|
56.8 %
|
|
Sample 3 Time
|
0 MM:SS
|
|
Sample 4 Width
|
0.48 in
|
|
Sample 4 Thickness
|
0.249 in
|
|
Sample 4 Area
|
0.1195 in^2
|
|
Sample 4 Ultimate strength
|
3525.9 psi
|
|
Sample 4 Ultimate Strength Actual
|
421.35 lbs
|
|
Sample 4 percent elongation
|
63 %
|
|
Sample 4 Time
|
0 MM:SS
|
|
Sample 5 Width
|
0.48 in
|
|
Sample 5 Thickness
|
0.259 in
|
|
Sample 5 Area
|
0.1243 in^2
|
|
Sample 5 Ultimate strength
|
3338.7 psi
|
|
Sample 5 Ultimate Strength Actual
|
415 lbs
|
|
Sample 5 percent elongation
|
59 %
|
|
Sample 5 Time
|
0 MM:SS
|
|
Sample 6 Width
|
0.48 in
|
|
Sample 6 Thickness
|
0.251 in
|
|
Sample 6 Area
|
0.1205 in^2
|
|
Sample 6 Ultimate strength
|
3369.3 psi
|
|
Sample 6 Ultimate Strength Actual
|
406 lbs
|
|
Sample 6 percent elongation
|
59 %
|
|
Sample 6 Time
|
0 MM:SS
|
|
Ultimate Strength Average
|
3526 psi
|
|
Percent Elongation Average
|
60 %
|
DIME Test ID: 2024-03-12-35-4
Test Method: ASTM D2369-Jul10: Standard Test Method for Volatile Content of Coatings
Verified Date: 05/17/2024
Date Tested: 04/18/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Mean of two volatile content determination
|
46.5
|
DIME Test ID: 2024-03-12-35-5
Test Method: CTM 551-August 2012: Method of Test for Determining Suitability of Materials for Overlayment and Repair of Portland Cement Concrete Pavements and Structures
Verified Date: 05/17/2024
Date Tested: 03/19/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
|
Curing history for Sample 1
|
24hr
|
|
Maximum applied load (P) for Sample 1
|
1295 lb
|
|
Span length for Sample 1
|
9 in
|
|
Break location for Sample 1
|
bond
|
|
Specimen defects/notes for Sample 1
|
no data
|
|
Surface type for Sample 1
|
SSD
|
|
Modulus of rupture (R) for Sample 1
|
647.5 psi
|
|
Curing history for Sample 2
|
24hr
|
|
Maximum applied load (P) for Sample 2
|
961.6 lb
|
|
Span length for Sample 2
|
9 in
|
|
Break location for Sample 2
|
bond
|
|
Specimen defects/notes for Sample 2
|
no data
|
|
Surface type for Sample 2
|
SSD
|
|
Modulus of rupture (R) for Sample 2
|
480.8 psi
|
|
Curing history for Sample 3
|
24hr
|
|
Maximum applied load (P) for Sample 3
|
1308 lb
|
|
Span length for Sample 3
|
9 in
|
|
Break location for Sample 3
|
bond
|
|
Specimen defects/notes for Sample 3
|
no data
|
|
Surface type for Sample 3
|
SSD
|
|
Modulus of rupture (R) for Sample 3
|
654 psi
|
DIME Test ID: 2024-03-12-35-6
Test Method: SCAQMD 309-91-Feb93: Determination of Static Volatile Emissions
Verified Date: 05/17/2024
Date Tested: 03/18/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
|
Diameter of lid
|
153.9 mm
|
|
Room Temperature
|
78 f
|
|
Tare weight
|
no data
|
|
Initial weight
|
100.19 grams
|
|
Weight at 5 minutes
|
100.085 grams
|
|
Weight at 10 minutes
|
100.006 grams
|
|
Weight at 15 minutes
|
99.945 grams
|
|
Weight at 20 minutes
|
99.88 grams
|
|
Weight at 25 minutes
|
99.825 grams
|
|
Weight at 30 minutes
|
99.719 grams
|
|
Final weight
|
99.72 grams
|
|
Total weight loss
|
0.47 grams
|
|
Calculated radius of gallon can lid in cm
|
7.695 cm
|
|
Lid Factor
|
53.757 m^2
|
|
Volatile emission
|
25.266 grams/m^2
|
