Sample Record for 2024-03-15-1
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 994267 DEA: 07326204 EFIS: 0716000113
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-39-17.8
Work Description: CONSTRUCT BRIDGE, PLACE STRUCTURAL STEEL AND CONCRETE BARRIER.
Location Description: LOS ANGELES COUNTY IN AZUSA AT SAN GABRIEL RIVER BRIDGE
Contractor Name: FEC Future Contractors & Engineers, Inc
Contractor Address: 184 Technology Dr., Ste 2, Irvine, CA 92618
Resident Engineer: Joe Doughly Structure Rep.: Hadi Moradi
Sample Information
DIME Sample ID: 2024-03-15-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Los Angeles Field Office
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 03/15/2024
Date that the sample was received by the laboratory/organization performing the testing: 03/19/2024
The quantity of what the sample constitutes: 21 Bolts
A brief description of the sample: A325 HDG Type 1
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Cordova Bolt
Material Information
Rocap Number(s): 76829-1
Heat Number(s): 3121459, 8000010207, 128064
Nut Mfg. Lot Number(s): 459484A
Washer Mfg. Lot Number(s): 0123-596
Bolt Specification: A325
Bolt Length(s): 33"
Nut Specification: A563 GR 1045L
Washer Specification: F436
Finish: HDG
Diameter/Size: 1 1/2"
Bolt Mfg. Lot Number: 76829-3
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 2
DIME Test ID: 2024-03-15-1-1
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 04/04/2024
Date Tested: 03/29/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 1 | 3121459 | 0.501 | 0.197 | 91224 | 128671 | 18.9 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 f
|
Test 2 of 2
DIME Test ID: 2024-03-15-1-2
Test Method: ASTM A370-20: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 04/04/2024
Date Tested: 03/29/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 2 | 3121459 | 0.501 | 0.197 | 90167 | 128337 | 18.6 | aauvinen |
| |
|
UTM
|
67kip
|
|
Temperature
|
72 f
|
