Print Report | Back to Sample Detail

Sample Record for 2024-03-05-34

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994869 DEA: 073237U4 EFIS: 0720000224 QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-150-13.3/19
Work Description: PLACE HMA (TYPE A) AND COLD PLANE ASPHALT
Location Description: VENTURA COUNTY IN AND NEAR OJAI FROM BURNHAM ROAD TO GORHAM ROAD
Contractor Name: C. A. RASMUSSEN INC.
Contractor Address: 28548 Livingston Ave., Valencia, CA, 91355
Resident Engineer: Denrick Bautista Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-03-05-34
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 03/05/2024
Date that the sample was received by the laboratory/organization performing the testing: 03/13/2024
The quantity of what the sample constitutes: 4 Bags of Comb. Agg, 1 Bag Rap
A brief description of the sample: JMF 3/4" HMA-A-SP R25 0.5% LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0135A-24
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials- Saticoy

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-19-0020,91-19-0035
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at Vulcan Materials- Saticoy
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 220200 SAT LTR
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2024-03-05-34-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2024-03-05-34-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates03/13/2024Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory