Print Report | Back to Sample Detail

Sample Record for 2024-03-04-20

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994767 DEA: 043Q5304 EFIS: 0419000221 QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-4,242,680-VAR
Work Description: POLYESTER CONCRETE OVERLAY, GRIND BRIDGE DECK, & REPLACE JOINT SEALS.
Location Description: CONTRA COSTA COUNTY AT VARIOUS LOCATIONS
Contractor Name: MYERS & SONS CONSTRUCTION, LLC
Contractor Address: 45 Morrison Avenue, Sacramento, CA 95838
Resident Engineer: Rabindra Mukherjee Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-03-04-20
TL Number from the TL Form: Sacramento Caltrans lab
Sample Submitted By Organization: Kwik Bond Polymers
Sample Organization Contact: (760) 518-6064
Type of Sample: Quality Control
Type of Material: Methacrylate
Sample Taken Date: 03/04/2024
Date that the sample was received by the laboratory/organization performing the testing: 03/04/2024
The quantity of what the sample constitutes: 100 Totes
A brief description of the sample: 2 pints KBP 204, CHP, 8020
From where was the sample collected: Source
Laboratory sample identification: 000038KBP
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kwik Bond Polymers, Benicia

Material Information

Mfg. Lot Number(s): 2430891990
Batch number: 2430891990
Mix number: 2430891990
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2024-03-04-20-1
Test Method: CONCLP 4-16: HMWM
Verified Date: 03/25/2024
Date Tested: 03/25/2024
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: spencer.adams@dot.ca.gov
Organization Phone: (916) 227-5716
General Comments for this Test: Accepted Vendors Results
Test Result Compliance: complies
Additional Comments When Verified:
Viscosity (ASTM D 2196) Brookfield RVT with UL adapter, 50 RPM @ 77 deg F, 25 max cps @ 77 deg F 19.46
Specific gravity (ASTM D 1475) 0.90 min @ 77 deg F 1.09
Volatile content (ASTM D 2369) 30% max 27.8
Flash point (ASTM D 3828) more than 180 deg F 190
PCC - SSD bond strength (CA Test 551) 500 psi minimum @ 24 hours 721
Tack free time, 400 minutes max 385