Print Report | Back to Sample Detail

Sample Record for 2024-02-19-12

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 44444 DEA: ASCP EFIS: ASCP QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for Asphalt Supplier Certification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-02-19-12
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Asphalt Binder
Sample Taken Date: 02/19/2024
Date that the sample was received by the laboratory/organization performing the testing: 03/05/2024
The quantity of what the sample constitutes: 1 of 1
A brief description of the sample: Tank 111
From where was the sample collected: Manufacturer
Laboratory sample identification: 021924-7010-001
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Casa Grande, AZ

Material Information

Performance Grade: PG 70-10
Modified: No
Lot number:
Sublot number:
Tank number: Tank 111
Time of sample: 6AM
HMA Supplier:
Certified Asphalt Supplier: Wright Asphalt Products Co. - Casa Grande AZ
Multigrade: No
Multigrade Type:
Asphalt Binder Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2024-02-19-12-1
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 03/08/2024
Date Tested: 03/08/2024
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Original
Test Result Compliance: complies
Additional Comments When Verified:
Phase Original binder
Test Gap 1 mm
Test Frequency 10.0 rad/s
Strain Amplitude 12.00 %
Stress Amplitude 0.173 kPa
Phase Angle (δ) (for the 10 cycles) 87.8 degree
Complex Modulus (G*) (for the 10 measurements) 1.434 kPa
Test Temperature (Specimen 1) 70.0 C
Dynamic Shear, G*/sin(δ) 1.44 kPa