Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 994728 DEA: 032J8104 EFIS: 0322000102
QA Service Level: 1
DIST-CO-RTE-PM: 03-BUT-99-R30.6,R31.5
Work Description: CONSTRUCT SLOPE PAVING AND INSTALL AESTHETIC FEATURE.
Location Description: BUTTE COUNTY IN CHICO AT SKYWAY OVERCROSSING AND AT EAST 20TH STREET OVERCROSSING
Contractor Name: VIKING CONSTRUCTION COMPANY, INC.
Contractor Address: P O BOX 1508, RANCHO CORDOVA, CA 95741
Resident Engineer: Unknown Structure Rep.: Benjamin Baker
DIME Sample ID: 2024-02-23-2
TL Number from the TL Form:
Sample Submitted By Organization: CT SC - 3667 - Chico
Sample Organization Contact: (530) 713-7871
Type of Sample: Quality Assurance
Type of Material: Concrete
Sample Taken Date: 02/23/2024
Date that the sample was received by the laboratory/organization performing the testing: 02/24/2024
The quantity of what the sample constitutes: E 20th St. L&R Abutment 5
A brief description of the sample: PCC
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mathews Readymix
The concrete mix design number: 07035P15
The truck number from where the sample was collected:
The batch plant ticket number from where the sample was collected: 17027258
Concrete batch plant:
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: On Job Site at Concrete Truck
Where the material sample would have been placed if not sampled:
From Lot No.:
Bag Lot No.:
DIME Test ID: 2024-02-23-2-1
Test Method: ASTM C39-18: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 03/22/2024
Date Tested: 03/22/2024
Submitted By Organization: CT D03 - Chico Field Laboratory
Organization Address: 2707 Notre Dame Boulevard,
Organization City: Chico
Organization State: CA
Organization Zipcode: 95928
Organization Email: bmckeehan@ghirardelliassoc.com
Organization Phone: (916) 799-4305
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
3
|
|
Test performed
|
With no density determined
|
|
Average diameter of cylinder 1
|
4.00 in
|
|
Average diameter of cylinder 2
|
4.00 in
|
|
Capped in accordance with?
|
ASTM C617 - Sulfur Mortar Cap
|
|
Average diameter of cylinder 3
|
4.00 in
|
|
Cross sectional area of cylinder 1
|
12.57 in^2
|
|
Cross sectional area of cylinder 2
|
12.57 in^2
|
|
Cross sectional area of cylinder 3
|
12.57 in^2
|
|
Compressive strength (to nearest 10 psi)
|
5560 psi
|
|
Maximum load on cylinder 1
|
69660 lb
|
|
Maximum load on cylinder 2
|
68620 lb
|
|
Maximum load on cylinder 3
|
71460 lb
|
|
Compressive strength of cylinder 1
|
5541.8 psi
|
|
Type of fracture pattern of cylinder 1
|
5
|
|
Compressive strength of cylinder 2
|
5459.0 psi
|
|
Compressive strength of cylinder 3
|
5685 psi
|
|
Type of fracture pattern of cylinder 2
|
2
|
|
Type of fracture pattern of cylinder 3
|
5
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
|
Correction factor for cylinder 1
|
1
|
|
Correction factor for cylinder 2
|
1
|
|
Correction factor for cylinder 3
|
1
|
|
Age of specimen
|
28 days
|
|
Age of specimen in hours
|
0 hours
|
