Print Report | Back to Sample Detail

Sample Record for 2016-07-16-1

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 3807 DEA: 07121844 EFIS: 0700000117 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-42.8/47.3
Work Description: CONSTRUCT HOV LANES, RETAINING WALLS AND SOUND WALLS.
Location Description: LOS ANGELES COUNTY IN LOS ANGELES, GLENDALE, AND BURBANK FROM ROUTE 5/134 SEPARATION TO MAGNOLIA BOULEVARD OVERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 13170 TELFAIR AVENUE, SYLMAR, CA 91342
Resident Engineer: James Shih Structure Rep.: Matthew Remo

Sample Information

DIME Sample ID: 2016-07-16-1
TL Number from the TL Form: C952637 thru C952648
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 07/16/2016
Date that the sample was received by the laboratory/organization performing the testing: 07/26/2016
The quantity of what the sample constitutes: 12
A brief description of the sample: Check Sample Plates
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Stinger Bridge Iron

Material Information

Heat Number(s): 2U133-403, 2U025-902, 2U036-503, 2U229-203, 2
Material Specification: A709
Grade: 50
Thickness: .5in .625in 1in 1.25in
Shape: Square
Metal Foundry Manufacturer (Mill): EVRAZ
Plate Dimension: 12in x 12in

Test Results

Test 1 of 14

DIME Test ID: 2016-07-16-1-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 08/09/2016
Date Tested: 08/03/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Number of Samples 24
SampleHeat NumberDiameter (in)Area (sqin)Stress at Offset (psi)Tensile Strength (psi)Elongation in 4 x d (%)Tested By
2U2290.4950.1924535327344029.6Brian
2T7400.4970.194650057678030.3Brian
2U0590.4950.1924558287241029.3Brian
2U0590.4960.1932553157286029.3Brian
2T9230.5010.1971681458474027.3Brian
2T9230.4930.1909718358538022.4Brian
2T9520.4970.194682008265026.8Brian
2T9520.4980.1948674198243024.6Brian
2U0250.4950.1924594878150027.5Brian
2U0250.4980.1948593798127028.5Brian
2U0360.4930.1909543377406029.6Brian
2U2290.4940.1917536627328029.6Brian
2U0360.4950.1924545087397031.6Brian
2U0240.4970.194546727648028.3Brian
2U0240.4950.1924550517678029Brian
2T2760.3460.094670668332027.9Brian
2T2760.3470.0946670848345023.1Brian
2U1330.4970.194546177650027.1Brian
2U1330.4970.194541127659027.5Brian
2U2300.4960.1932541287392029.8Brian
2U2300.4940.1917535987404031Brian
2U1340.4970.194632977590030.5Brian
2U1340.4990.1956624347605030.5Brian
2T7400.4960.1932662527663030.4Brian
UTM 67KIP
Temperature 72 F

Test 2 of 14

DIME Test ID: 2016-07-16-1-2
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U229
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40 oF
Impact Energy 1 81 ftlb
Impact Energy 2 114 ftlb
Impact Energy 3 112 ftlb
Average Impact Energy 102 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 3 of 14

DIME Test ID: 2016-07-16-1-3
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U133
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 39.8 oF
Impact Energy 1 129 ftlb
Impact Energy 2 109 ftlb
Impact Energy 3 271 ftlb
Average Impact Energy 170 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 4 of 14

DIME Test ID: 2016-07-16-1-4
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U230
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 39.8 oF
Impact Energy 1 118 ftlb
Impact Energy 2 119 ftlb
Impact Energy 3 118 ftlb
Average Impact Energy 118 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 5 of 14

DIME Test ID: 2016-07-16-1-5
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U134
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 39.5 oF
Impact Energy 1 112 ftlb
Impact Energy 2 116 ftlb
Impact Energy 3 117 ftlb
Average Impact Energy 115 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 6 of 14

DIME Test ID: 2016-07-16-1-6
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2T740
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 39.9 oF
Impact Energy 1 104 ftlb
Impact Energy 2 99 ftlb
Impact Energy 3 86 ftlb
Average Impact Energy 96 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 7 of 14

DIME Test ID: 2016-07-16-1-7
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U059
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40 oF
Impact Energy 1 103 ftlb
Impact Energy 2 92 ftlb
Impact Energy 3 60 ftlb
Average Impact Energy 85 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 8 of 14

DIME Test ID: 2016-07-16-1-8
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2T923
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40.6 oF
Impact Energy 1 46 ftlb
Impact Energy 2 55 ftlb
Impact Energy 3 46 ftlb
Average Impact Energy 49 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 9 of 14

DIME Test ID: 2016-07-16-1-9
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2T952
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40.5 oF
Impact Energy 1 34 ftlb
Impact Energy 2 34 ftlb
Impact Energy 3 45 ftlb
Average Impact Energy 38 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 10 of 14

DIME Test ID: 2016-07-16-1-10
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U025
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40.2 oF
Impact Energy 1 88 ftlb
Impact Energy 2 120 ftlb
Impact Energy 3 50 ftlb
Average Impact Energy 86 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 11 of 14

DIME Test ID: 2016-07-16-1-11
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U036
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40 oF
Impact Energy 1 137 ftlb
Impact Energy 2 132 ftlb
Impact Energy 3 152 ftlb
Average Impact Energy 140 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 12 of 14

DIME Test ID: 2016-07-16-1-12
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U024
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40.5 oF
Impact Energy 1 39 ftlb
Impact Energy 2 40 ftlb
Impact Energy 3 63 ftlb
Average Impact Energy 47 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 13 of 14

DIME Test ID: 2016-07-16-1-13
Test Method: ASTM E23-12c: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials (Charpy Impact)
Verified Date: 08/09/2016
Date Tested: 08/04/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2T276
Test Result Compliance: complies
Additional Comments When Verified:
Temperature Required 40 oF
Minimum Energy Required 25 ftlb
Test Temperature 1 40.7 oF
Impact Energy 1 53 ftlb
Impact Energy 2 56 ftlb
Impact Energy 3 58 ftlb
Average Impact Energy 56 ftlb
Striker Radius 8 mm
Value Exceeds The Machine Capacity? No

Test 14 of 14

DIME Test ID: 2016-07-16-1-14
Test Method: SMTL CHEM-16: Steel Chemistry Analysis
Verified Date: 08/09/2016
Date Tested: 08/08/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: (916) 227-7253
General Comments for this Test: Heat 2U133, 2U025, 2U036, 2U229, 2U230, 2T952, 2T740, 2T923, 2U059, 2U134, 2T276, 2U024
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.