Print Report | Back to Sample Detail

Sample Record for 2024-01-19-30

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994436 DEA: 11080284 EFIS: 1117000085 QA Service Level: 1
DIST-CO-RTE-PM: 11-IMP-98-32.1/32.5
Work Description: Place HMA, minor concrete, modify drainage, landscape and electrical.
Location Description: IMPERIAL COUNTY IN CALEXICO FROM OLLIE AVENUE TO 0.1 MILE EAST OF ROCKWOOD AVENUE
Contractor Name: Ral Investment Corporation
Contractor Address: 10065 Old Grove Rd Ste 200, San Diego, CA, 92131-1664
Resident Engineer: Daniel HERNANDEZ DUARTE Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-01-19-30
TL Number from the TL Form:
Sample Submitted By Organization: CT D11 - District 11 Materials Laboratory
Sample Organization Contact: (858) 688-1570
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 01/19/2024
Date that the sample was received by the laboratory/organization performing the testing: 01/25/2024
The quantity of what the sample constitutes: 5 Bags
A brief description of the sample: 1-1/2" HMA-A
From where was the sample collected: Source
Laboratory sample identification: 5308-PSU
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: API Gateway

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-13-0057
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1-1/2 inch
The concrete mix design number:
Lot number: 1
Sublot number: 2
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2024-01-19-30-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 03/08/2024
Date Tested: 02/02/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 84 %
Cumulative percent passing the 3/4 in. sieve 74 %
Cumulative percent passing the 1/2 in. sieve 69 %
Cumulative percent passing the 3/8 in. sieve 58 %
Cumulative percent passing the #4 sieve 37 %
Cumulative percent passing the #8 sieve 24 %
Cumulative percent passing the #16 sieve 18 %
Cumulative percent passing the #30 sieve 14 %
Cumulative percent passing the #50 sieve 9 %
Cumulative percent passing the #100 sieve 4 %
Cumulative percent passing the #200 sieve 2.1 %

Test 2 of 2

DIME Test ID: 2024-01-19-30-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 03/08/2024
Date Tested: 02/02/2024
Submitted By Organization: CT D11 - District 11 Materials Laboratory
Organization Address: 7177 Opportunity Road,
Organization City: San Diego
Organization State: CA
Organization Zipcode: 92111
Organization Email: dave.m.cortez@dot.ca.gov
Organization Phone: (858) 688-1570
General Comments for this Test: Complies
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 71