Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 3169 DEA: 060G0504
QA Service Level: 1
DIST-CO-RTE-PM: 06-KER-178-20.5/21.7
Work Description: WASHOUT
Location Description:
Contractor Name: GRANITE
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2024-01-16-35
TL Number from the TL Form:
Sample Submitted By Organization: CT D06 - Fresno Construction Field Office
Sample Organization Contact: (559) 243-3828
Type of Sample: Acceptance
Type of Material: Concrete
Sample Taken Date: 01/16/2024
Date that the sample was received by the laboratory/organization performing the testing: 01/19/2024
The quantity of what the sample constitutes: 300
A brief description of the sample: PCC cylinders
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name: 245 Retaining Wall
The fabricator/manufacturer/facility name: Outback Materials
The concrete mix design number: 40F5G07
The truck number from where the sample was collected: 103
The batch plant ticket number from where the sample was collected: 152838
Concrete batch plant: Outback Material
The fabricator/manufacturer designation for the sample:
A detailed description of where the material sample was collected: Concrete from wheelbarrow
Where the material sample would have been placed if not sampled: Pile #13
From Lot No.:
Bag Lot No.:
DIME Test ID: 2024-01-16-35-1
Test Method: CTM 521-June 2020: Method of Test for Compressive Strength of Molded Concrete Cylinders
Verified Date: 02/14/2024
Date Tested: 02/13/2024
Submitted By Organization: CT D06 - Millbrook Field Laboratory
Organization Address: 3240 North Millbrook Avenue,
Organization City: Fresno
Organization State: CA
Organization Zipcode: 93726
Organization Email: tomas.silva@dot.ca.gov
Organization Phone: (559) 417-5341
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Unit system used?
|
US Units
|
|
Number of specimens
|
3
|
|
Test performed
|
With no density determined
|
|
Capped in accordance with?
|
ASTM C1231 - Unbonded Elastomeric Pad Cap
|
|
Average diameter of cylinder 1
|
4.00 in
|
|
Average diameter of cylinder 2
|
4.00 in
|
|
Average diameter of cylinder 3
|
4.00 in
|
|
Cross sectional area of cylinder 1
|
12.57 in^2
|
|
Cross sectional area of cylinder 2
|
12.57 in^2
|
|
Cross sectional area of cylinder 3
|
12.57 in^2
|
|
Compressive strength (to nearest 10 psi)
|
7730 psi
|
|
Maximum load on cylinder 1
|
98180 lb
|
|
Maximum load on cylinder 2
|
97240 lb
|
|
Maximum load on cylinder 3
|
96250 lb
|
|
Compressive strength of cylinder 1
|
7810.7 psi
|
|
Type of fracture pattern of cylinder 1
|
2
|
|
Compressive strength of cylinder 2
|
7735.9 psi
|
|
Compressive strength of cylinder 3
|
7657.1 psi
|
|
Type of fracture pattern of cylinder 2
|
2
|
|
Type of fracture pattern of cylinder 3
|
2
|
|
Comment on any defect in either specimen or caps (Max 250 Characters)
|
no data
|
|
Correction factor for cylinder 1
|
1
|
|
Correction factor for cylinder 2
|
1
|
|
Correction factor for cylinder 3
|
1
|
|
Age of specimen
|
28 days
|
|
Age of specimen in hours
|
0 hours
|
