Print Report | Back to Sample Detail

Sample Record for 2024-01-11-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2024-01-11-3
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 01/11/2024
Date that the sample was received by the laboratory/organization performing the testing: 01/15/2024
The quantity of what the sample constitutes: 100 Square Feet
A brief description of the sample: 1" x 48" x 25'
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Cal-Neva Supply

Material Information

Mfg. Lot Number(s): 220268
Material/Compound/Elastomer ID: polychloroprene gr 3
Samples Representing: 1 roll
Description (size): 1" x 48"x 25 lf
Comments:
Description (Number of Shims): 0
Type of Bearing Pad: Plain
Description (Thickness of Shims): NA
Manufacturer(s): American Biltrite
Batch Number: 220268
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2024-01-11-3-1
Test Method: ASTM D2240-15r21: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 01/26/2024
Date Tested: 01/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Temperature 72 f
Humidity 50 %
Reading #1 57
Reading #2 55
Reading #3 57
Reading #4 57
Reading #5 57
Mean 56.6

Test 2 of 4

DIME Test ID: 2024-01-11-3-2
Test Method: ASTM D412-16r21: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 01/26/2024
Date Tested: 01/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 5
Unit of the Ultimate Tensile Values lbf per sqr in
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.09
Sample 1 Thickness all Within 0.003 inch? Yes
Sample 1 Ultimate Tensile 2584.05 lbf/in^2
Sample 1 Elongation (350% Min) Pass
Sample 2 Median Thickness 0.087
Sample 2 Thickness all Within 0.003 inch? Yes
Sample 2 Ultimate Tensile 2568.26 lbf/in^2
Sample 2 Elongation (350% Min) Pass
Sample 3 Median Thickness 0.09
Sample 3 Thickness all Within 0.003 inch? Yes
Sample 3 Ultimate Tensile 2222.55 lbf/in^2
Sample 3 Elongation (350% Min) Pass
Sample 4 Median Thickness 0.09
Sample 4 Thickness all Within 0.003 inch? Yes
Sample 4 Ultimate Tensile 2451.31 lbf/in^2
Sample 4 Elongation (350% Min) Pass
Sample 5 Median Thickness 0.09
Sample 5 Thickness all Within 0.003 inch? Yes
Sample 5 Ultimate Tensile 2059.35 lbf/in^2
Sample 5 Elongation (350% Min) Pass
Median of the Ultimate Tensile Values 2451.3 lbf/in^2

Test 3 of 4

DIME Test ID: 2024-01-11-3-3
Test Method: ASTM D624-00r20: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 01/26/2024
Date Tested: 01/23/2024
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of specimens tested 3
UTM 2kip
Humidity 50.00 %
Temperature 72 F
Sample 1 Median Thickness 0.086
Sample 1 Tear Strength 225.4
Sample 2 Median Thickness 0.087
Sample 2 Tear Strength 224.9
Sample 3 Median Thickness 0.089
Sample 3 Tear Strength 233
Median of the Tear Strength Values 225.4 lb/in

Test 4 of 4

DIME Test ID: 2024-01-11-3-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 01/24/2024
Date Tested: 01/24/2024
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Result Pass