Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 215005 DEA: 044J7504 EFIS: 0416000005
QA Service Level: 1
DIST-CO-RTE-PM: 04-ALA-84-R0.73/3.06
Work Description: INSTALL OUTER SEPARATION BARRIERS Concrete barrier, shoulder widening, striping, cold plane and overlay.
Location Description: ALAMEDA COUNTY IN FREMONT FROM 0.7 MILE NORTH OF SAN MATEO COUNTY LINE TO 0.1 MILE SOUTH OF TOLL PLAZA
Contractor Name: BAY CITIES PAVING AND GRADING INC
Contractor Address: 55 SANTA CLARA AVE. SUITE 145, OAKLAND, CA 94520
Resident Engineer: Rodelio Baluyot Structure Rep.: Vincent Tang
DIME Sample ID: 2023-10-30-71
TL Number from the TL Form: C666438
Sample Submitted By Organization: CT D04 - Hayward Field Laboratory
Sample Organization Contact: (510) 723-0168
Type of Sample: Production Start-Up
Type of Material: Hot Mix Asphalt
Sample Taken Date: 10/30/2023
Date that the sample was received by the laboratory/organization performing the testing: 10/31/2023
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 1/2 RHMA-O
From where was the sample collected: Supplier
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Martin Marietta-Sunol
DIME Test ID: 2023-10-30-71-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 11/22/2023
Date Tested: 11/09/2023
Submitted By Organization: CT D04 - Hayward Field Laboratory
Organization Address: 21339 Cabot Boulevard,
Organization City: Hayward
Organization State: CA
Organization Zipcode: 94545
Organization Email: pamela.brown@dot.ca.gov
Organization Phone: (510) 385-8258
General Comments for this Test: Asphalt Content #1
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Celsius
|
Test procedure used?
|
Method A
|
Mass of the specimen basket assembly
|
3255.1 g
|
Mass of the specimen and specimen basket assembly prior to ignition
|
4849.7 g
|
Mass of HMA Sample prior to ignition
|
1594.6 g
|
Corrected Asphalt Binder Content
|
7.38 %
|
Mass Loss
|
136.6 g
|
Mass of aggregate remaining after ignition
|
1458.0 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
1.00 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.19 %
|
Test Temperature
|
538 C
|
DIME Test ID: 2023-10-30-71-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 11/22/2023
Date Tested: 11/14/2023
Submitted By Organization: CT D04 - Hayward Field Laboratory
Organization Address: 21339 Cabot Boulevard,
Organization City: Hayward
Organization State: CA
Organization Zipcode: 94545
Organization Email: pamela.brown@dot.ca.gov
Organization Phone: (510) 385-8258
General Comments for this Test: Asphalt Content #2
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used?
|
Celsius
|
Test procedure used?
|
Method A
|
Mass of the specimen basket assembly
|
3122.5 g
|
Mass of the specimen and specimen basket assembly prior to ignition
|
4655.4 g
|
Mass of HMA Sample prior to ignition
|
1532.9 g
|
Corrected Asphalt Binder Content
|
7.25 %
|
Mass Loss
|
129.5 g
|
Mass of aggregate remaining after ignition
|
1403.4 g
|
Correction Factor (Percent by mass of HMA Specimen)
|
1.00 %
|
Moisture Content
|
0.00 %
|
Temperature Compensation Factor
|
0.20 %
|
Test Temperature
|
538 C
|