Print Report | Back to Sample Detail

Sample Record for 2023-10-27-23

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994821 DEA: 080J2404 EFIS: 0822000124 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-142-3.5/R3.9
Work Description: HMA (TYPE A), RUBBERIZED HMA (GAP GRADED), CL 2 AB, RDWY EXCAVATION.
Location Description: SAN BERNARDINO COUNTY IN CHINO HILLS FROM 0.5 MILE NORTH OF FELDSPAR DRIVE TO CHINO HILLS PARKWAY
Contractor Name: POWELL CONSTRUCTORS INC
Contractor Address: 644 Pedley Rd., Riverside. CA
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-10-27-23
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 10/27/2023
Date that the sample was received by the laboratory/organization performing the testing: 10/30/2023
The quantity of what the sample constitutes: 2 Bags Of Agg., 1 Bag Rap
A brief description of the sample: PSUE 3/4" HMA-A-SP R15 No LAS
From where was the sample collected: Manufacturer
Laboratory sample identification: 0553A-23
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt- Corona

Material Information

Source Identification (SMARA, name of Pit or Job Site): 31-33-0005
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Belt Cut at All American Corona Plant
Where the material sample would have been placed if not sampled: Asphalt Paving
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: 105793
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2023-10-27-23-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-2AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-4AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-5AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-7AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-8ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-9CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory
2023-10-27-23-10CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates10/31/2023Not scheduledSatish JainCT D08 - Fontana Southern Regional Laboratory