Print Report | Back to Sample Detail

Sample Record for 2023-10-17-35

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994534 DEA: 010H1604 EFIS: 0117000117 QA Service Level: 1
DIST-CO-RTE-PM: 01-MEN-101-R33.7/R43.2
Work Description: REPLACE AC SURFACING, PLACE HMA-A, RHMA-G & CONCRETE BARRIER.
Location Description: MENDOCINO COUNTY NEAR WILLITS FROM 1.1 MILES NORTH OF WEST ROAD OVERCROSSING TO 0.6 MILE SOUTH OF HAEHL CREEK BRIDGE
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 715 COMSTOCK STREET, SANTA CLARA CA 95054
Resident Engineer: Steve Tisell Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-10-17-35
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Department Acceptance
Type of Material: Asphalt Rubber Binder
Sample Taken Date: 10/17/2023
Date that the sample was received by the laboratory/organization performing the testing: 10/24/2023
The quantity of what the sample constitutes: I CAN OF RUBBER
A brief description of the sample: 64-16 RUBBER
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Valero - Benicia

Material Information

Asphalt modifier supplier:
Performance Grade: PG 64-16
Lot number:
Sublot number:
Asphalt Rubber Binder Mix Number:
Test results on following page(s): 4

Test Results

Test 1 of 4

DIME Test ID: 2023-10-17-35-1
Test Method: ASTM D217-16: Standard Test Methods for Cone Penetration of Lubricating Grease (Cone Penetration)
Verified Date: 10/27/2023
Date Tested: 10/25/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Determination Unworked Penetration
Unworked Penetration 28 0.1 mm

Test 2 of 4

DIME Test ID: 2023-10-17-35-2
Test Method: ASTM D36-14ε1: Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) (Softening Point)
Verified Date: 10/27/2023
Date Tested: 10/26/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
ASTM Thermometer used? C
Softening Point Sample 1 76 C
Softening Point Sample 2 77 C
Bath Liquid freshly boiled distilled water
Minutes Reaction no data

Test 3 of 4

DIME Test ID: 2023-10-17-35-3
Test Method: ASTM D5329-16: Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements (Asphalt Pavement)
Verified Date: 10/27/2023
Date Tested: 10/25/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Temperature 25 C
Final Dial reading (F1) 61 mm
Ball Penetration (P1) 0 mm
Final Dial reading (F2) 60 mm
Ball Penetration (P2) 0 mm
Final Dial reading (F3) 60 mm
Ball Penetration (P3) 0 mm
Resilience 1 39 %
Resilience 2 40 %
Resilience 3 40 %
Average Resilience 40 %
Minutes Reaction no data

Test 4 of 4

DIME Test ID: 2023-10-17-35-4
Test Method: ASTM D7741-11ε1: Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer (Viscosity)
Verified Date: 10/27/2023
Date Tested: 10/17/2023
Submitted By Organization: CT HQ - Sacramento Asphalt Binder Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: test performed by field tech
Test Result Compliance: complies
Additional Comments When Verified:
Unit system used? SI Units
Test Temperature 190 C
Test 1 Viscosity 2400.0 Pa-s
Test 2 Viscosity 2400.0 Pa-s
Test 3 Viscosity 2400.0 Pa-s
Average Viscosity 2400.0 Pa-s
Minutes Reaction no data