Print Report | Back to Sample Detail

Sample Record for 2023-10-06-36

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994638 DEA: 023J8404 EFIS: 0222000089 QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-96-28.0/34.5
Work Description: HMA OVERLAY WITH REPLACE ASPHALT CONCRETE SURFACING.
Location Description: SISKIYOU COUNTY NEAR HAPPY CAMP FROM 4.6 MILES WEST OF CLEAR CREEK BRIDGE TO 0.2 MILE EAST OF OAK FLAT CREEK BRIDGE
Contractor Name: J.F. SHEA CONSTRUCTION, INC.
Contractor Address: 17400 Clear Creek Road, Redding, CA 96001
Resident Engineer: Nicholas Riddle Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-10-06-36
TL Number from the TL Form: 824487
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Production Start-Up
Type of Material: Aggregate
Sample Taken Date: 10/06/2023
Date that the sample was received by the laboratory/organization performing the testing: 10/06/2023
The quantity of what the sample constitutes: Production Start-Up Evaluation
A brief description of the sample: 3 bags of Lime Treated 3/8-inch Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D79367A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: J.F. Shea Construction - Fawndale Rock and Asphalt (Redding, CA)

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-45-0017::Fawndale Rock Quarry (Redding, CA)
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2023-10-06-36-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 10/17/2023
Date Tested: 10/11/2023
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 94 %
Cumulative percent passing the #4 sieve 56 %
Cumulative percent passing the #8 sieve 32 %
Cumulative percent passing the #16 sieve 19 %
Cumulative percent passing the #30 sieve 12 %
Cumulative percent passing the #50 sieve 7 %
Cumulative percent passing the #100 sieve 5 %
Cumulative percent passing the #200 sieve 4 %