Print Report | Back to Sample Detail

Sample Record for 2023-09-14-61

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215220 DEA: 07210624 EFIS: 0719000068 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA,SBD-71-1.8/R4.7&R0.0/R0.2
Work Description: PLACE STRUCTURE CONCRETE RETAINING WALLS & BOX CULVERT AND PLACE JPCP.
Location Description: IN LOS ANGELES AND SAN BERNARDINO COUNTIES IN POMONA AND CHINO HILLS FROM 0.2 MILE SOUTH OF MISSION BOULEVARD OVERCROSSING TO 0.2 MILE OF SAN BERNARDINO COUNTY LINE.
Contractor Name: OHL USA
Contractor Address: 1920 Main Street, Suite 310, Irvine, California 92614
Resident Engineer: Michael Wang Structure Rep.: Ryan Valentine

Sample Information

DIME Sample ID: 2023-09-14-61
TL Number from the TL Form:
Sample Submitted By Organization: Alta Vista Solutions - Whittier
Sample Organization Contact: (510) 542-9827
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 09/14/2023
Date that the sample was received by the laboratory/organization performing the testing: 09/14/2023
The quantity of what the sample constitutes: 18000 sqft
A brief description of the sample: Subgrade
From where was the sample collected: Source
Laboratory sample identification: 23-1421
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: n/a

Material Information

Source Identification (SMARA, name of Pit or Job Site): n/a
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: CTM 231 Test Holes
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number:
Lot number:
Sublot number:
Aggregate Mix Number:

Test Results

Test 1 of 2

DIME Test ID: 2023-09-14-61-1
Test Method: CTM 231-March 2013: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates Using Nuclear Gages
Verified Date: 09/27/2023
Date Tested: 09/14/2023
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Standard Count Density 3047 g/cc
Count or Density 1 2974 g/cc
Count or Density 2 2968 g/cc
Count or Density 3 3182 g/cc
Count or Density 4 2967 g/cc
Count or Density 5 2964 g/cc
Standard Count Moisture 1093 g/cc
Moisture Count 1 231 g/cc
Moisture Count 2 236 g/cc
Moisture Count 3 229 g/cc
Moisture Count 4 233 g/cc
Moisture Count 5 246 g/cc
Sum of Count or Density 15055 g/cc
Average of Count or Density 3011 g/cc
Sum of Moisture Count 1175 g/cc
Average of Moisture Count 235 g/cc
Count Ratio Density 0.99
Count Ratio Moisture 0.22
Calculated Percent Relative Compaction 97.3 %
Reported Percent Relative Compaction 97 %

Test 2 of 2

DIME Test ID: 2023-09-14-61-2
Test Method: CTM 216-June 2011: Method of Test for Relative Compaction of Untreated and Treated Soils and Aggregates
Verified Date: 09/27/2023
Date Tested: 09/14/2023
Submitted By Organization: Alta Vista Solutions - Whittier
Organization Address: 12409 Slauson Avenue, Suite I,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90606
Organization Email: nicholas.hoffmann@oneatlas.com
Organization Phone: (510) 542-9827
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Is oversize material No
In-place wet density 2.18
Highest adjust wet density 2.24
Relative compaction 97
% Moisture 7.4 %
Optimum Moisture 11.4 %