Print Report | Back to Sample Detail

Sample Record for 2016-04-06-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 7613 DEA: 071218W4 EFIS: 0700021119 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-29.4/31.6
Work Description: REALIGN ROUTE 5 AND RAILROAD TRACKS AND RECONFIGURE ON- AND OFF-RAMPS.
Location Description: LOS ANGELES COUNTY IN BURBANK FROM WEST MAGNOLIA BOULEVARD OVERCROSSING TO 0.3 MILE NORTH OF BUENA VISTA STREET/WINONA AVENUE UNDERCROSSING
Contractor Name: SECURITY PAVING COMPANY, INC.
Contractor Address: 13170 TELFAIR AVENUE, SYLMAR, CA 91342
Resident Engineer: Vladimir Gurfinkel Structure Rep.: Gon Choi

Sample Information

DIME Sample ID: 2016-04-06-10
TL Number from the TL Form: 0406G
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Quality Control
Type of Material: Concrete
Sample Taken Date: 04/06/2016
Date that the sample was received by the laboratory/organization performing the testing: 04/11/2016
The quantity of what the sample constitutes: 4
A brief description of the sample: 6X12
From where was the sample collected: Job Site
Laboratory sample identification: 889-6G
Structure unique identifier: RW 1607 STEP 4 to 7 FOOTING
Structure name: Unknown
The fabricator/manufacturer/facility name: NATIONAL READY

Material Information

The concrete mix design number: S62578
The truck number from where the sample was collected: 394
The batch plant ticket number from where the sample was collected: 194410
Concrete batch plant: Unknown
The fabricator/manufacturer designation for the sample: Unknown
A detailed description of where the material sample was collected: SHUTE
Where the material sample would have been placed if not sampled: Unknown
From Lot No.: Unknown
Bag Lot No.: Unknown

Test Results

Test 1 of 1

DIME Test ID: 2016-04-06-10-1
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Verified Date: 05/04/2016
Date Tested: 05/04/2016
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Unit system used? US Units
Number of specimens 4
Test performed With no density determined
Capped in accordance with? ASTM C617/CTM521
Average diameter of cylinder 1 5.98 in
Average diameter of cylinder 2 5.98 in
Average diameter of cylinder 3 5.98 in
Average diameter of cylinder 4 5.98 in
Cross sectional area of cylinder 1 28.09 in^2
Cross sectional area of cylinder 2 28.09 in^2
Cross sectional area of cylinder 3 28.09 in^2
Cross sectional area of cylinder 4 28.09 in^2
Compressive strength (to nearest 10 psi) 3740 psi
Maximum load on cylinder 1 100420 lb
Maximum load on cylinder 2 99980 lb
Maximum load on cylinder 3 106290 lb
Maximum load on cylinder 4 113250 lb
Compressive strength of cylinder 1 3574.9 psi
Type of fracture pattern of cylinder 1 1
Compressive strength of cylinder 2 3559.3 psi
Compressive strength of cylinder 3 3783.9 psi
Compressive strength of cylinder 4 4031.7 psi
Type of fracture pattern of cylinder 2 3
Type of fracture pattern of cylinder 3 1
Type of fracture pattern of cylinder 4 3
Comment on any defect in either specimen or caps (Max 250 Characters) no data
Correction factor for cylinder 1 1
Correction factor for cylinder 2 no data
Correction factor for cylinder 3 no data
Correction factor for cylinder 4 no data
Age of specimen 28 days
Age of specimen in hours no data