Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 3825 DEA: 07138204 EFIS: 0700000142
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-47,103-3.5/4.6,0.0/1.1
Work Description: REPLACE STEEL BRIDGE WITH CIP PS CONCRETE BOX GIRDER BRIDGE AND RAMPS.
Location Description: LOS ANGELES COUNTY IN LONG BEACH AND LOS ANGELES ON ROUTE 47 FROM OCEAN BOULEVARD TO ROUTE 103 JUNCTION AND ON ROUTE 103 FROM ROUTE 47 JUNCTION TO ANAHEIM STREET OVERHEAD
Contractor Name: M C M CONSTRUCTION INC
Contractor Address: P O BOX 620, NORTH HIGHLANDS, CA 95660
Resident Engineer: Daniel Leon Structure Rep.: Andy Chen
DIME Sample ID: 2016-04-05-10
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Ductile Iron Cast Samples
Sample Taken Date: 04/05/2016
Date that the sample was received by the laboratory/organization performing the testing: 04/08/2016
The quantity of what the sample constitutes: 4
A brief description of the sample: Coupon Casting
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Frazier Frazier
Heat Number (s): 3PT, 3NT
Part Number (s): 68 37 216
Material Specification: A536
Grades: 65-45-12
Metal Foundry Manufacturer (Mill): Frazier Frazier
Prestressing Manufacturer: DSI
DIME Test ID: 2016-04-05-10-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 04/14/2016
Date Tested: 04/13/2016
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: All samples FAIL 1 or all of the following - Low Tensile, Low Yield and Low Elongation.
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Number of Samples
|
4
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 3PT | 0.4976 | 0.1945 | 43239 | 59960 | 7.6 | Arnold | | 3PT | 0.4975 | 0.1944 | 42830 | 60230 | 8.3 | Arnold | | 3NT | 0.4975 | 0.1944 | 47281 | 72710 | 19.2 | Arnold | | 3NT | 0.4975 | 0.1944 | 66645 | 112100 | 8.8 | Arnold |
| |
|
UTM
|
67KIP
|
|
Temperature
|
72 F
|
