Print Report | Back to Sample Detail

Sample Record for 2023-09-19-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 994486 DEA: 051Q0804 EFIS: 0522000148 QA Service Level: 1
DIST-CO-RTE-PM: 05-SCR,SCR/SCR-9,1-17.41/17.5
Work Description: Repair of viaduct barrier wall and replace CIDH piles. Holiday Lane Viaduct Slipout. State Route 9 at PM SCR-09-8.4 Jay's Slide, and SR 236 (SCR-236-16.87)
Location Description: Santa Cruz County. State Route 9 at PM SCR-09-8.4 and SR 236 (SCR-236-16.87)
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 580 West Beach St, Watsonville, CA 95076
Resident Engineer: Ian Nguyen Structure Rep.: Stephen Pozzo

Sample Information

DIME Sample ID: 2023-09-19-7
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 09/19/2023
Date that the sample was received by the laboratory/organization performing the testing: 09/22/2023
The quantity of what the sample constitutes: 194
A brief description of the sample: 1-1/4" x 30 F1554 Hex Bolt
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Universal Industrial Sales Inc

Material Information

Rocap Number(s): na
Heat Number(s): 58057771
Nut Mfg. Lot Number(s): na
Washer Mfg. Lot Number(s): na
Bolt Specification: F1554 Gr 105
Bolt Length(s): 30"
Nut Specification: na
Washer Specification: na
Finish: HDG
Diameter/Size: 1-1/4"
Bolt Mfg. Lot Number: 76533-1
Rocap Test Requirement(s): na
Lubricant Requirements(s): none
Test results on following page(s): 5

Test Results

Test 1 of 5

DIME Test ID: 2023-09-19-7-1
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Verified Date: 09/22/2023
Date Tested: 09/22/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: F1554
Test Result Compliance:
Additional Comments When Verified:
Number of Samples 1
SampleSizeArea (in^2)Peak Load (lbf)Peak Load (kN)Tensile Strength (psi)Stress at Offset (psi)Load at Offset (lbf)Comments
1AUNC 1-1/4 0.969138145614142565130502126456F1554
UTM 400kip
Temperature 72

Test 2 of 5

DIME Test ID: 2023-09-19-7-2
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/22/2023
Date Tested: 09/22/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 58057771
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings RED KT
Size 1.25 in
Bolt Length 30 in
Gage Type Pass

Test 3 of 5

DIME Test ID: 2023-09-19-7-3
Test Method: ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/22/2023
Date Tested: 09/22/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 58057771
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings RED KT
Size 1.25 in
Bolt Length 30 in
Gage Type Pass

Test 4 of 5

DIME Test ID: 2023-09-19-7-4
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/22/2023
Date Tested: 09/22/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 58057771
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings RED KT
Size 1.25 in
Bolt Length 30 in
Measurement Average 6.57 mils

Test 5 of 5

DIME Test ID: 2023-09-19-7-5
Test Method: ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/22/2023
Date Tested: 09/22/2023
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 58057771
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings RED KT
Size 1.25 in
Bolt Length 30 in
Measurement Average 6.2 mils