Print Report | Back to Sample Detail

Sample Record for 2023-08-31-48

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 215157 DEA: 021H5704 EFIS: 0216000036 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-299-67.8/77.8
Work Description: BURNEY CAPM - PAVEMENT REHABILITATION
Location Description: BUNCH GRASS LOOKOUT RD TO NAPA LN
Contractor Name: JF Shea Constrcution
Contractor Address: 17400 Clear Creek Road, Redding, CA 96001
Resident Engineer: Kyle Higgins Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2023-08-31-48
TL Number from the TL Form: 823607
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/31/2023
Date that the sample was received by the laboratory/organization performing the testing: 08/31/2023
The quantity of what the sample constitutes: 8 Boxes
A brief description of the sample: 3/4" RHMA-G PG64-16 Valero
From where was the sample collected: Manufacturer
Laboratory sample identification: D79337
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: JF Shea Fawndale

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2023-08-31-48-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/26/2023
Date Tested: 08/31/2023
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Gmm=2.448
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? SI Units
Mass Determination Air
Method Performed Mechanical Agitation - Method A
Mass of container filled with water 7335.1 grams
Mass of oven-dry sample in air for Sample 1 2517.0 grams
Mass of container filled with the sample and water for Sample 1 8823.9 grams
Temperature of Water 24 °F
Specific Gravity for Sample 1 2.448
Theoretical maximum density at 25°C (77°F) 2440.9 kg/m^3

Test 2 of 2

DIME Test ID: 2023-08-31-48-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/26/2023
Date Tested: 09/05/2023
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test: Gmb=2.385
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.385
Bulk Specific Gravity 2 2.387
Bulk Specific Gravity 3 2.384
Average Bulk Specific Gravity 2.385