Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214670 DEA: 07331004 EFIS: 0716000220
QA Service Level: 1
DIST-CO-RTE-PM: 07-VEN-101-9.0/9.2
Work Description: CONCRETE SLAB REPLACEMENT & GRIND, PAVEMENT & RESURFACE ACE
Location Description: VENTURA COUNTY IN THOUSAND OAKS FROM NORTHBOUND OFF-RAMP TO SOUTHBOUND OFF-RAMP AT CONEJO COMMERCIAL VEHICLE ENFORCEMENT FACILITIES
Contractor Name: POWELL CONSTRUCTORS INC
Contractor Address: 8555 BANANA AVE, FONTANA, CA 92335
Resident Engineer: Ranjit Singh Structure Rep.: Unknown
DIME Sample ID: 2023-09-08-27
TL Number from the TL Form: 924630B
Sample Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Sample Organization Contact: (213) 817-0387
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/08/2023
Date that the sample was received by the laboratory/organization performing the testing: 09/12/2023
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4" RHMA-G
From where was the sample collected: Manufacturer
Laboratory sample identification: 23-428
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA-Irwindale
DIME Test ID: 2023-09-08-27-1
Test Method: AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/15/2023
Date Tested: 09/12/2023
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 817-0387
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
|
Number of Samples
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
Mechanical Agitation - Method A
|
|
Mass of container filled with water 1
|
7359.3 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
2628.3 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8913.1 grams
|
|
Temperature of Water
|
77 °F
|
|
Specific Gravity for Sample 1
|
2.446
|
|
Theoretical maximum density at 25°C (77°F)
|
152.3 lb/ft^3
|
DIME Test ID: 2023-09-08-27-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 09/15/2023
Date Tested: 09/12/2023
Submitted By Organization: CT D07 - Materials Field Laboratory, Unit 1953
Organization Address: 1940 South Workman Mill Road,
Organization City: Whittier
Organization State: CA
Organization Zipcode: 90601
Organization Email: chad.chotibhongs@dot.ca.gov
Organization Phone: (213) 817-0387
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Celsius
|
|
Test procedure used?
|
Method A
|
|
Mass of the specimen basket assembly
|
4037.4 g
|
|
Mass of the specimen and specimen basket assembly prior to ignition
|
6117.9 g
|
|
Mass of HMA Sample prior to ignition
|
2080.5 g
|
|
Corrected Asphalt Binder Content
|
7.36 %
|
|
Mass Loss
|
153.7 g
|
|
Mass of aggregate remaining after ignition
|
1926.8 g
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
0.03 %
|
|
Moisture Content
|
0.00 %
|
|
Temperature Compensation Factor
|
0.00 %
|
|
Test Temperature
|
538 C
|
